Jump to content
SAU Community

Emanage Ultimate + Extras + Mines Ecu + Asus 8.9" Eee Pc - Eoi

SECURITY
 Share

Recommended Posts

SECURITY Grand Master

SECURITY

Posted
Posted

I'm thinking about selling my Emanage Ultiamate + all harnesses.

Its the newer (E) board which allows for the knock sensor to work on the date logs.

It comes with:

Wideband cable to hook up the 0-5v outputs to (which also allows for auto-tune).

3 bar map sensor - allows for the removal of the AFM.

Home made launch control switch.

At this stage im not entirely sure on whether i want to let go of it or not.

If the buyer is in Syd I'll give them a run-down on how to go about getting their car setup and all the features you will need.

If interested you may also be a part of an up and coming tuning software trial which has given me PLENTY of gains (more info about this to the buyer).

I've had it for around a year and still have the box/manual/software cd etc.

$900 + postage.

I've got a Mines chipped ecu which ive been running with the emanage to make it easier to tune as its got no fuel cut, leaner maps and no rev limiter (which can be controlled by the emanage). This is also on the car at the moment.

$250 + postage.

I also have a black Asus EEE PC. its the 8.9" version which i use to tune as i go, its running windows XP and im sure ive got the receipt around somewhere. its a really good little computer which i carry around when i feel like doing some data logging or some touch up tunes. It has the emanage software installed + all of my data logs.

$500 + postage.

I'd really like to sell these together as its an awesome little kit, I'd sort something out in terms of price if its all sold together.

I'd highly recommend this to anyone with an AUTO/tiptronic who is looking for a kit that wont mess with the shifts as this is what i was looking for when i built it.

PM or post here

Cheers,

Joe

SECURITY Grand Master

SECURITY

Posted
  • Author
Posted

for all those that have asked, the ultimate comes with ALL harnesses you will need to wire it in. all instructions are included.

boostedfe3 Rookie

boostedfe3

Posted
Posted (edited)
for all those that have asked, the ultimate comes with ALL harnesses you will need to wire it in. all instructions are included.

You still have the mines ecu. I have a manual transmission will this still work, and how much shipped to the U.S. at zip code 37663. Oh yeah I have a series II rb25.

Edited by boostedfe3
SECURITY Grand Master

SECURITY

Posted
  • Author
Posted
You still have the mines ecu. I have a manual transmission will this still work, and how much shipped to the U.S. at zip code 37663. Oh yeah I have a series II rb25.

pm sent

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...
SECURITY Grand Master

SECURITY

Posted
  • Author
Posted

and to answer the most common question about the Mines ECU- this is no longer in the car, ive got it sitting in my drawer ready to go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...