Jump to content
SAU Community

Recommended Posts

Hi,

I bought my 2nd 350GT Coupe in April. I traded my 03 model on a low K 05. It had 20" wheels on it at the dealers but I didn't like the look of them and so got them to put my 03 17" wheels on it as it handled great with the Goodyear Eagle FI GS D3s.

I need to replace the tyres now due to wear. I wondered about changing to 45 profile Eagle F1s but to get the same diameter as the 225/50-17 and 235/50-17 I would need to go to 235/45-17 and 255/45-17.

Has anyone tried this size?

Regards

Edited by Wayne NZ
Link to comment
https://www.sau.com.au/forums/topic/250742-tyres-for-the-stock-17-wheels/
Share on other sites

i'm running 235/45-17 on my v and have troubles with the bottom scraping

here is some good info i received from n15m0 about this issue

"Stock wheel & tyre combo:

225/50/17 Overall diameter = 656.59mm

Yours:

235/45/17 Overall diameter = 643.12mm

So you are technically lower by around 14mm which is what is causing you to scrape and possibly made worse by suspension sagging as well depends on how many kms you have on the clock."

since you intend on putting 255's at the back which equates to 661.3mm, i think it should prevent the issue with scraping.

sorry i can't offer more advice as i'm still green around the ears :action-smiley-069:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...