Jump to content
SAU Community

Recommended Posts

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

thanks for the help just hav too work out a budget new couple of weeks im gettin frnt mount 044 fuel pump fuel reg

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352041
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

650cc injectors?

you will piss 300rwhp in on stock injectors.

i'd be going with what michael said first, safc, 25 turbo.. etc.. then see how you go. can always sell the safc/turbo for pretty much what it cost you and upgrade if/when you want more power.

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352048
Share on other sites

people have done mid to low 13's with 250rwhp

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :laugh:

edit: beaten by mitchy_

Edited by [Michael]
Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352049
Share on other sites

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :P

edit: beaten by mitchy_

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352744
Share on other sites

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352754
Share on other sites

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

thats would be good bro maybe ill buy the dump pipe and hight flow cat how much am i lookin at payin

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352789
Share on other sites

go to justjap.com have a look at what styles / prices

if not call them they are nice people you would be looking at like 100 - 250 for the Dump pipe DEPENDS which one u like / wants.

High flow cat is around 175 + / or decat is free :P ha

then not to sure about sending it over its not to much!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352859
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

yeah i kne but very soon im gunna take it down hehe i got stock susp jus hav too give my car a serv and stuff

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352959
Share on other sites

Should be all good i still need to head down want to see what mine is running as it is stock still

got

FMIC

Custom straight turbo back Zaust

pod

JIC Coilovers

and other bits

hopefully get in the 13's

then need get a tune and see how it goes!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352973
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

this is very true

went down last week to the drags and there was a guy in a 2JZ Supra TT running 17s????? :P

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352982
Share on other sites

17's!!! unless he had no legs or it was a N/A with bagdes hahaha

wow

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353018
Share on other sites

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

how will i find him bro

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353025
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...