Jump to content
SAU Community

Recommended Posts

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

thanks for the help just hav too work out a budget new couple of weeks im gettin frnt mount 044 fuel pump fuel reg

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352041
Share on other sites

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i don't think 260hp atw will achieve low 13's? aim for 300hp maybe?

get Vi-Pec ECU, 650cc injectors (sorry was thinking of RB25) maybe go a bit smaller?, 040/044, FMIC and a turbo upgrade... all the basic bolts on and you should achieve 300hp i would say

estimate though of course, and with a really good tune... with those mods you'll push a fair bit more than 12psi safely to help you get more than the 260 you're expecting

650cc injectors?

you will piss 300rwhp in on stock injectors.

i'd be going with what michael said first, safc, 25 turbo.. etc.. then see how you go. can always sell the safc/turbo for pretty much what it cost you and upgrade if/when you want more power.

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352048
Share on other sites

people have done mid to low 13's with 250rwhp

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :laugh:

edit: beaten by mitchy_

Edited by [Michael]
Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352049
Share on other sites

+1 r32 is lighter than the r33/34 so you dont need as much power

i ran 13.0 with 300ish rwhp (top end speed was good for a mid 12's 112mph) so my advice would start at 250rwhp and see where that takes you, remember practice makes perfect and dont expect to be super fast at the drags your 1st time :P

edit: beaten by mitchy_

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352744
Share on other sites

thank for ur help micheal i got a qoute today for a x force turbo bak zorst for 1450 is that a good and wat sore of power would i get

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352754
Share on other sites

hrmm Not saying thats bad but its alot i paid

under 1k for a turbo back 3" custom Zaust from my mate i could ask if you isnt busy to make you one all you need to get it the high Flow cat (or decat) and Muffler (cannon)

thats would be good bro maybe ill buy the dump pipe and hight flow cat how much am i lookin at payin

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352789
Share on other sites

go to justjap.com have a look at what styles / prices

if not call them they are nice people you would be looking at like 100 - 250 for the Dump pipe DEPENDS which one u like / wants.

High flow cat is around 175 + / or decat is free :P ha

then not to sure about sending it over its not to much!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352859
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

yeah i kne but very soon im gunna take it down hehe i got stock susp jus hav too give my car a serv and stuff

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352959
Share on other sites

Should be all good i still need to head down want to see what mine is running as it is stock still

got

FMIC

Custom straight turbo back Zaust

pod

JIC Coilovers

and other bits

hopefully get in the 13's

then need get a tune and see how it goes!

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352973
Share on other sites

Anything can happen on the track its a different surface comes down to practise and time / driver! so you can have 250 hp and still run 14 /15s

best guess is to try for yuorself, its hard to judge

this is very true

went down last week to the drags and there was a guy in a 2JZ Supra TT running 17s????? :P

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4352982
Share on other sites

17's!!! unless he had no legs or it was a N/A with bagdes hahaha

wow

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353018
Share on other sites

it had a fmic on it and his number plates we 2JZ but i dont know, there was no bov and those things weight a fair bit but it was only on par with v6 commonwhores. We thought he was just a tool who had put badges on and bolted a FMIC in to look "cool"

how will i find him bro

Link to comment
https://www.sau.com.au/forums/topic/251396-heyy/page/2/#findComment-4353025
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...