Jump to content
SAU Community

Drifting of a different style

Mini Me

By Mini Me,
in General Automotive Discussion

 Share

Recommended Posts

Mini Me Contributor

Mini Me

Posted
  • Author
Posted

gary McCoy is probably the best at it, of the GP guys. When he had a decent bike and was in the top 5 he was pushing really hard. Braking so hard into corners that the rear of the bike unweights and slides all over the track.

The Supermotard guys are something else. Its a completely different style of riding. The bikes only weigh 100-140kg so they are the fastest bikes through the twisties. Power is between 30 to 80hp, and being a big bore single cylinder they sound like nothing else.

slip Mentor

slip

Posted
Posted

that happens to a lot of guys chaos.

couple of years ago in WSBK Ben bostrom's setup was great, ass end of the bike used to sway from side to side.

dads building a supermotard right now, but we wont be backing it in like that!

that takes bulk skill.

slip Mentor

slip

Posted
Posted

Grrr - his kawasaki has ample power to get it sideways. Power is not the issue, its riding style, and the power delivery of the bike, setup, etc. He came from a speedway background, so thats how he always rode.

Mini Me - brand new DR650, full staintune system, Laced 17" road wheels, airbox/filter mods, rejetted, geared down, new bars, strip weight, 2nd hand race tyres, suspension at both ends, should be fun. Only got 600k's on it, so its not even run in yet. I wont ride it too much.

One of the things i love about them, is that they are cheap to crash. :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R33 GTST Axles

      By GTSBoy · Posted

      There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • jdniss
      Forced Performance Hta Turbos

      By jdniss · Posted

      Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • thozza
      Intro/R33 owner

      By thozza · Posted

      Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Lithium
      Forced Performance Hta Turbos

      By Lithium · Posted

      Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • tidi0x
      R33 GTST Axles

      By tidi0x · Posted

      The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...