Jump to content
SAU Community

Recommended Posts

Hi All,

I'm moving up To Brisbane very shortly (less than 3 months) from Melbourne. Work has offered me a position that I couldn't refuse, so I'll be about for a least 3 years. Currently we're looking for a house to buy within our price range, etc and was after some info about some good areas and areas to keep away from. Also some travel times into the city. I'l lbe working from home mostly, so travel time in peak hour isn't really an issue. My Fiance' will most likely be working in the city however.....

Also what motorsport activities happen? Is SAU QLD CAMS affiliated? Is there any curcuit championship or anything?

Any info/tips/pointers, etc, would be much apprieciated.

Thanks

Scott

Link to comment
https://www.sau.com.au/forums/topic/251770-tips-for-a-new-queenslander/
Share on other sites

It's been a while since I've lived in Brisbane but the general consensus is to stay away from Moorooka and surrounding areas.

If you're interested in the Track then you should check out Ruzic's group who recently got good sponsors for his QR sprint series.

http://www.timeattack.com.au/ is his website.

if you want to be a fully fledged qld'er then you have to support all the local sporting teams, drink XXXX and dress in tshirt/singlet, shorts and thongs on your days off. :cool:

just like with any major city, the further you live from the city, the longer it will take to to get in. the public transport has improved over the years. i only moved back to brissy after living in sydney for the last 7 years and i did notice that the bus service has improved alot...from the southside anyway.

i have noticed that traffic has gotten alot worse now. depending on which direction you'll be coming into the city will determine the travel time also. not during peak hour, i can get from sunnybank (suburb about 15km's south of the city) into the city in about 15 mins. the freeways here are always pretty free flowing and even in peak hour you are still moving though at a slow pace. it's a carpark on the main roads in sydney during peak hour.

if you provided us with info about what suburbs you were interested in moving to then i'm sure people can provide better info.

cheers

a nice area to live in Loganholme or Tanah Merah, it you wanna be sorta away from the brisbane rush, but then again its only a 30 minute drive from the CBD via the M1. so if you wanna live in a quiet suburb but still wanna be close to everything Logan is the area for you. a little further south you have Ormeau/Pimpama/Upper Coomera, they are all pretty much half way between GC and CBD (GoldCoast and Brissy) but all have fantastic houses...

places to stay away from.... no offence to the ppl that live there but... probably Eagleby.... or Beenleigh. not because of the people so much but all the houses are really.. really.. really... old/falling apart.. you may find the odd house that is new or so. but mostly old houses.

haha!

Thanks for the replies guys!!! We were looking south of the river. There are a few homes that we've both liked the look of in a fair few places. Inala, browns Plains, Loganlea, Tanah Merah, Slacks Creek, Redbank plains, Camira - which seems a fair way out, etc

So what area are most SAU'ers from? What's security like? I read that someone came home to find a junkie going through their kitchen? Kind of thing you find in Eagleby?? :P

Or woodridge you will get them in your backyard.

If you could afford it, and wanted nice living go to victoria point or redland bay... i moved from frankston to here 5 yrs ago and have never looked back.

i would advise you to stay away from inala definately and browns plains really is not a desirable area, some areas of loganlea are f**ked aswell. i live at woolloongabba and MOST of the surrounding areas seem ok but theres still some shit hanging around. if i had to pick id probably look at the surrounding areas of Mt. Gravatt

I've been in Brisbane, a couple of months over a year now. I've been told to stay away from Inala also and that if I park my car it will probably be gone when I get back lol

In Mt Gravatt shared accomodation at the moment, Mt Gravatt's really central and close to everything really, but not the most affordable though. Gets a bit cheaper once you start moving further away from Mt Gravatt or further from the CBD in general though.

Inala, browns Plains, Loganlea, Tanah Merah, Slacks Creek, Redbank plains, Camira - which seems a fair way out, etc

^^^^^^^^

ive lived in all these areas many moons ago - stay away well away if you have a decent car

coorparoo is nice mt gravatt is nice

I have always lived in manly..its on the bay bout 20 min drive to the city and is just a nice place...pub is good and lots of parks and nice areas..

i agree manly is the best place i've lived, there's fishing, 2 pretty good pubs, you can eat fish and chips by the water and there is a train station.

Edited by Rebecky
haha!

Thanks for the replies guys!!! We were looking south of the river. There are a few homes that we've both liked the look of in a fair few places. Inala, browns Plains, Loganlea, Tanah Merah, Slacks Creek, Redbank plains, Camira - which seems a fair way out, etc

So what area are most SAU'ers from? What's security like? I read that someone came home to find a junkie going through their kitchen? Kind of thing you find in Eagleby?? :)

thats pretty much the shit list of brisbane

i agree that mt gravatt and surrounds are the best on the south side

So what sort of places are you guys living in? Rentals, units, houses, etc?

We want a decent 3br, house with double lock up garage as a minimum. Looking in the good ares, it looks like it is expensive to get something along those lines........

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was under the impression the reason why OEMs are going with solutions like relatively thin "right-sized" cylinder walls with technologies like PTWA and open deck is because they care a lot about whatever marginal knock margin benefits they get from that vs the structural rigidity benefits of a closed deck block and thicker cylinder walls. I also see some weird stuff like plastic inserts in the water jacket around the cylinders to try and equalize cylinder wall temperatures. re: the PRP blocks and heads at the end of the day it's hard to know what is and isn't going to work there, just have to see what the initial buyers say about it.
    • Which is why I didn't mention that hardness testing, and specifically mentioned the bore and deck thickness testing. Yeah, not really. The bore temperature will be a lot more even around the top half inch or so, where the material distribution is dominated by the deck, and which is the only place where the bore surface temperature heating any gas in the cylinder is likely to have any effect on detonation. Think about it. Another inch or so down the bore, you might have a hotter spot. The gas there might get a bit hotter, then the piston rises squeezes that gas away from there at high speed and mixes it with other gas from nearby. Instant dilution of the problem. I'd be surprised if it was an issue at any time other than in racing engines or OEM dev engines being run at the ragged edge of tuning. Say what now?
    • https://dsportmag.com/the-tech/education/engine-tech-material-hardness-testing/ The PRP testing on block hardness I'm not sure how much it actually can be trusted. The thinner cylinder walls on RBs is a bit of a problem vs 2JZ but it really depends on the design goal. Siamesed cylinder bores like a 2JZ cause uneven cylinder wall temps too, which means a bit of distortion induced by that + the hotspot can affect knock margin. Something that actually gives me a bit of pause with the PRP block, whether super thick cylinder walls are going to keep it from being drop-in compatible on an otherwise OEM rebuild. 
    • Yeah very valid point. I am waiting for one of the other tuners to come back from vacation so he can help me a bit when the cat is installed again. In the meantime I am going to finish up my polishing and ceramic coating that I have started myself.    N45 Dr Beasley product is highly recommended for a paint primer / polisher. Using this EXO Gtechniq also for the ceramic but next time might use the light serum before hand also. Looks great. 
    • Running rich in conditions where it shouldn't probably won't do great things for catalytic converter lifespan. I would fix that sooner than later.
×
×
  • Create New...