Jump to content
SAU Community

Recommended Posts

engine internals

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

head rebuilt with tomei poncams

tomei exhaust cam wheel

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black

gt3582r-iw with exhaust housing HPC coated black

choice of either 18 psi or 24 psi actuator.

turbo beenie

ss braided lines both feed and return.

3 inch dump with 2 inch wastegate pipe all in 316 stainless

5 inch cat

PFC with inbuilt Boost controller

600 x 300 x 80 ASE front mount

brand new bosch q45 AFM

4 inch stainless intake

FPR with gauge

044 intank setup.

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

includes all new custum clutches and kevlar band etc

this is my wifes car so was only ever boosted properly on the dyno.

either seperate for parts or sell car whole.

open to offers

Hey mate

I know you probably wanna sell the car whole, but would be interested in the Transmission if you do seperate it. Pm me details on price, locatation etc.

Cheers

Brendan

Hey mate

I know you probably wanna sell the car whole, but would be interested in the Transmission if you do seperate it. Pm me details on price, locatation etc.

Cheers

Brendan

no worries i will happily seperate the car if i can find buyers for a few of the major parts like manifold / turbo set up, engine , trans etc.once the big things are allocated i will strip all the parts and list prices for all the remaining mods.

I'm interested in some of the items but I'm located in the USA...do you have a problem with international postage? I have a FedEx account if that makes things easier for you. Thanks!

-Blake :P

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

rb25det

built 12 months ago but done low kays ,consists of

acid cleaned and prepped block, new welsh plugs etc

balanced crank to suit new rods and pistons

Eagle H beam rods

ACL Forged pistons

Jun oil drive collar

ARP crank, big end, and head studs

N1 oil pump

new R33 water pump

new tensioners and nissan belt

tomei oil retrictors

Short motor $3500

head rebuilt with tomei poncams $1500

tomei exhaust cam wheel (not installed) $200

new NGK iridium's

Bolt ons

ETM high mount manifold HPC coated black $1000

gt3582r-iw with exhaust housing HPC coated black $1500

choice of either 18 psi or 24 psi actuator. $100 each

turbo beenie $75

ss braided lines both feed and return. $100

3 inch dump with 2 inch wastegate pipe all in 316 stainless $200

5 inch cat $150

PFC with inbuilt Boost controller $1000

600 x 300 x 80 ASE front mount $700

brand new bosch q45 AFM $300

4 inch stainless intake $100

FPR with gauge $150

044 intank setup. $200

Trans

fully built box from MV Automatics

2800 high stall

stg 2 shift kit

large trans cooler

includes all new custum clutches and kevlar band etc $2200

PM sent

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...