Jump to content
SAU Community

Recommended Posts

hey guys, i have a problem.. i dunno what it is, i dont kno if any1 can help me, but here it goes.

R32 Skyline

Rb20det

R33 Turbo

aftermarket fuel pump

fmic

stock Bov

3" Straight Pipe exhaust, Decat, no resonator, no muffler

remapped to run .9bar

No boost control.

Recently, Boost dropped to .7bar

I changed the Fmic cos my old one was damaged, No difference

CLeaned AFM (was oily) No difference

Cleaned and tightened intercooler piping, No difference

Changed all turbo vac lines, No difference

CHecked turbo for shaft play, it is perfectly fine

Out of curiosity, we put on a Turbosmart Boost T, the setting is 0, as in, the valve is completely closed.

The car HIT .9Bar and held it. BUT-

If i hit full boost (.9) in 2nd gear, and say, shift into third gear @ 7000 rpm, the boost level drops dramatically and takes time to re spool up...

before the response was pretty much instant, so something is still not right.

ANY ideas?

Im thinking along the lines of the wastegate actuator diaphram being faulty?

or maybe a turbo exhaust gasket leak?

any otehr ideas?

thanks guys-

Link to comment
https://www.sau.com.au/forums/topic/251950-help-boost-issues-dunno-what-it-is/
Share on other sites

exact same as me and i would like to know to

I put a Turbosmart Boost T, the setting is 0, as in, the valve is completely closed.

The car HIT 10 and held it. BUT-

If i hit full boost in 2nd gear, and say, shift into third gear @ 7000 rpm, the boost level drops dramatically and takes time to re spool up...

before the response was pretty much instant, so something is still not right.

haha... hrmm, im going to change the wastegate actuator possibly on monday.

Ill PM you if it works-

PM me if u figure out whats wrong with yours too mate-

anyone else any ideas?

thanks mate let me know

Speaking from limited mechanical experience, when my car was playing silly buggers like this, with a boost tee, I ended up thinking it was leaking boost from a dodgy exhaust - replaced the V-band clamp and exhaust gasket, to find that the car was still problematic - it ended up being a severe blockage in the exhaust near the catalytic converter - if all else fails, I reccommend you check this out. I could be wrong, but hey it's a forum.

Speaking from limited mechanical experience, when my car was playing silly buggers like this, with a boost tee, I ended up thinking it was leaking boost from a dodgy exhaust - replaced the V-band clamp and exhaust gasket, to find that the car was still problematic - it ended up being a severe blockage in the exhaust near the catalytic converter - if all else fails, I reccommend you check this out. I could be wrong, but hey it's a forum.

no exhaust isnt blocked

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...