Jump to content
SAU Community

Recommended Posts

hahahahahaha you get funnier with each post Daniel.

give up pal.

I aim to please.

You southerners always say give up but you have not really provided any proof that I am incorrect other than to say you have a mate in marketing who says it's an old trick. Gee I must be wrong if he said that.

I spoke , in person, to a rep from the company and then a couple of hours ago I spoke on the phone to another one. I asked if the injectors were just an off the shelf Denso item. He said absolutely not!. He said again that they were made by Denso to their specs. I asked him to put something in writing so I could show you but he told me not to waste my time with wankers and he doesn't care if you don't want their injector because of it. He said they have nothing to prove or gain by doing such a thing.

So this is an apology to you if he is lying to my face and if the guy in the states is lying to me over the phone. I am sorry if they are lying. But until you can PROVE that I am incorrect and they are lying to me, then why don't YOU give up and stop giving people misleading information. At least my comments have foundation to them.

Ferrari pal vrrom vrrom

---------------------

Suprised some over zealous god moderator hasn’t closed this shit down.

I believe it would be important to reveal the outcome of my investigation. I will wait to hear what Denso have to say. I think it is important information that everyone can benefit from. I'm not here to sling rocks at Dirt, I just want proof when someone says I'm wrong.

Umm from a third person viewing this all i have seen so far is:

3lit3 32 made some phone calls to some what substanuate his claim that these items are made by Denso to a cetain spec as specified by Power Enterprise.

Dirt Garage has said this is crap and PE only make the packaging for this, but not been able to back it up with any more proof.

I think the person asking the question has the information that yse they are a quality injector, now he needs to make a decision if he wants these instead of nismo ones, unless someone else has some proof to provide.

I aim to please.

You southerners always say give up but you have not really provided any proof that I am incorrect other than to say you have a mate in marketing who says it's an old trick. Gee I must be wrong if he said that.

I spoke , in person, to a rep from the company and then a couple of hours ago I spoke on the phone to another one. I asked if the injectors were just an off the shelf Denso item. He said absolutely not!. He said again that they were made by Denso to their specs. I asked him to put something in writing so I could show you but he told me not to waste my time with wankers and he doesn't care if you don't want their injector because of it. He said they have nothing to prove or gain by doing such a thing.

So this is an apology to you if he is lying to my face and if the guy in the states is lying to me over the phone. I am sorry if they are lying. But until you can PROVE that I am incorrect and they are lying to me, then why don't YOU give up and stop giving people misleading information. At least my comments have foundation to them.

he was reluctant to give you anything in writing because they know its all marketing crap...nothing more. He had everything to prove by releasing the information, he could have shown how their product is different/superior to everyone elses...but he chose not to. Actual proof that your product is superior in performance is a marketing bonanza...thats everything to gain from a profit point of view and would give them a hand over their competition. Instead he chose to be mature and call someone a wanker. Dan c'mon you must be able to smell a rat? Im not e-battleing with you over it...im over it. Ill order an injector and test them...i dont need to ask for a line off some PR guy on the phone etc.

you have your opinion and i have mine.

be friends shake hands and lets move it on ok.

its nice to be nice :happy:

Edited by DiRTgarage
Ferrari pal vrrom vrrom

---------------------

Suprised some over zealous god moderator hasn’t closed this shit down.

Now why would i close it down Josh?

You QLD'ers always provide solid entertainment no matter what section its in.

lol e-battle!

so does anyone have a price comparison on the pwr items vs sard?

It often depends on the supplier, if you check across nengun, greenline and various other places ive found sometimes one place has a better price than the other so it pays to shop around before buying

At the end of the day if denso are supplying an injector to sard and it has the same P/N as an injector supplied to PE then it's the same injector.

If they've changed it it'll have a different p/n

Someone make with the part numbers.

make sure you get the plugs with them as they are not the same as sards :)

can make sard plugs work if you cut off some lugs

used 700 pe's on a customers r34 gtr with no probs get a replacement connector

however turned in to nightmare

Whoa, holy shit?!?

If I understand correctly, you mean 700cc PEs into R34 GTR did not turn out well?? Can you please elaborate? Or PM me? I am due to get them installed tomorrow!

Thanks.

At the end of the day if denso are supplying an injector to sard and it has the same P/N as an injector supplied to PE then it's the same injector.

If they've changed it it'll have a different p/n

Someone make with the part numbers.

precisely Dave.

the part numbers are identical

I think the person asking the question has the information that yes they are a quality injector, now he needs to make a decision if he wants these instead of nismo ones, unless someone else has some proof to provide.

Thank you.

Now why would i close it down Josh?

You QLD'ers always provide solid entertainment no matter what section its in.

What gave you the idea I meant you, Ash? There are two other moderators for this section. One I know for a fact dislikes my online persona a lot more then you.

Of course we would provide solid entertainment. It's the heat you see.

"make sure you get the plugs with them as they are not the same as sards

can make sard plugs work if you cut off some lugs

used 700 pe's on a customers r34 gtr with no probs getting a replacement connector

however turned in to nightmare"

errr?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...