Jump to content
SAU Community

Recommended Posts

hey pple i have searched and i could not find what i was looking for :P

at moment im running (splitfire coils )0.8mm gap in my r33 heat range 7 and i was thinking of going to 1.1 mm gap....

would these improve my millage and make the car run better ?

or should i stick to what i have now?

i have read of some people running 1.1 gap successfully with upgraded coil packs?

mods are basic filter,zorst,10psi,coller,splitfires

Link to comment
https://www.sau.com.au/forums/topic/252709-splitfires-and-11mm-gap/
Share on other sites

i know lines drink a lot but if it was able to run on 1.1 plug i tough would make the car run better and in gain receive extra mileage and power .

just reading thru some spark plug threads people seemed to run a 1.1 gap and got a much better burn of fuel making the car run better.

that's why i asked about the bigger gap

You can run a 1.1mm gap, quite easily.

Even on 10PSi...

I run a 1.1mm gap, and was at one point pushing 18PSi off a big huffer turbo, into a 3.0L block, without an issue of misfire.

I was also running 12PSi on the RB25 setup with a 1.1mm gap, without an issue in the world.

The stock plug gap is set at 1.1mm, and the FRESH coils from the factory, will run this, even with a few PSi more being thrown at it, so why wouldn't a set of coils that generate from memory a 50% stronger spark?

You can run a 1.1mm gap, quite easily.

Even on 10PSi...

I run a 1.1mm gap, and was at one point pushing 18PSi off a big huffer turbo, into a 3.0L block, without an issue of misfire.

I was also running 12PSi on the RB25 setup with a 1.1mm gap, without an issue in the world.

The stock plug gap is set at 1.1mm, and the FRESH coils from the factory, will run this, even with a few PSi more being thrown at it, so why wouldn't a set of coils that generate from memory a 50% stronger spark?

thanx for that , i was researching if it would be ok to run a 1.1 plug as per specs as i have new coils and only minor bolt on bits.

the reason for post was to see if anyone else has done it, i did not say i will do it,or will not but, why not ask and save on time and changing sparkies over when you can get a answer from pepole that actually have this setup and running it like MBS206

I agree. Iridiums are a waste of money. What gap you will be able to run with out the car missfiring will depend mainly on the condition of the coilpacks. If they are old and overheated and cracked then the car will missfire. If they are in good condition then it show easily be able to run 1.1 gap.

And i thought splitfires werent any stronger than new stock coilpacks... has this 50% stronger spark been proven?

And i thought splitfires werent any stronger than new stock coilpacks... has this 50% stronger spark been proven?

they must be stronger. i havent heard of anyone running new nissan coilpacks in heavily modified cars. splitfires are a common choice for racing applications.

on my splitfire box it has a graph showing a dyno comparison, an RB making 323ps with regular coilpacks, and 330 with splitfires. theres also another graph which i assume is something to do with spark or volts or something (its in japanese) but the splitfires easily outperform the comparative product.

Ah k just because lots of people say that they arent actually any better. They are just more popular because the are less than half the price of new nissan coilpacks from the dealers. Although i know there are many 400kw gtr's running stock coilpacks without any problems.

With the graph, were the nissan coilpacks old or new. Cos obviously new splitfires are going to outperform 20year old nissan ones..

Ah k just because lots of people say that they arent actually any better. They are just more popular because the are less than half the price of new nissan coilpacks from the dealers. Although i know there are many 400kw gtr's running stock coilpacks without any problems.

With the graph, were the nissan coilpacks old or new. Cos obviously new splitfires are going to outperform 20year old nissan ones..

well thats a very good point. everyone rubbished kkr turbos a while back, many people still do, but they seem to go alright for people who actually tried them, inc. myself.

the graph says splitfire vs "normal", engine is an rb26dett. so if theyre new factory coilpacks, 7ps is a pretty big gain.

i didnt even consider the cost, i though splitfires were fkn expensive. but then again, genuine nissan is a total rip off for just about everything.

LOL yeah apparently genuine new nissan ones cost near $1000 so splitfires are half that price which is why they are a good choice even if they arent any better.

But i guess if they are better than new stock ones thats an added bonus

hey must be stronger. i havent heard of anyone running new nissan coilpacks in heavily modified cars. splitfires are a common choice for racing applications.

on my splitfire box it has a graph showing a dyno comparison, an RB making 323ps with regular coilpacks, and 330 with splitfires. theres also another graph which i assume is something to do with spark or volts or something (its in japanese) but the splitfires easily outperform the comparative product.

the hks drag gtr runs stock coil packs, the only reason ppl go spitfires is cause nissan

want something like $1000 for them brand new

they must be stronger. i havent heard of anyone running new nissan coilpacks in heavily modified cars. splitfires are a common choice for racing applications.

on my splitfire box it has a graph showing a dyno comparison, an RB making 323ps with regular coilpacks, and 330 with splitfires. theres also another graph which i assume is something to do with spark or volts or something (its in japanese) but the splitfires easily outperform the comparative product.

Stronger based on what?

They are not stronger at all.

You are comparing 10-15yr old worn Nissan coils, vs a new coil out of the box, which is wrong. Unless you had brand new coils in your car, your results/testing is incorrect.

If you purchased a NEW set of Nissan coils, put them against Splitfires - you wouldnt know the difference other than one lightens your wallet substancially more than the other.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...