Jump to content
SAU Community

Recommended Posts

Must sell $20,000 as is. No trades, sorry.

I have several cars and its time for this completed project to go. This car owes me almost $90,000 in total.

This a true 300-350RWKW car with heaps or torque and very low engine km. Don’t be fooled, there are no cheap, crappy parts; no short cuts and no money spared on this project. Just looking for a quick sale.

This car will do 0-100 in approx 3sec and 1/4 mile in under 12sec every day on 98 octane.

If you are interested call me on 0414 575 676 or send me an e-mail at [email protected]

If I don't respond to your e-mail it is because I think you are wasting both my and your time.

***************************************************

VEHICLE SPECS:

This is a R33 Nissan Skyline GTS-t sedan with $60 000 in modifications.

The vehicle is in show condition and has never been raced; has done less

then 5000km in the last 3.5 years. Engine has less then 30,000km; modifications in general all have less

then 5,000km. Every modified component on this vehicle is from a reputable OEM (99% from Japan); no inferior parts.

The vehicle has passed a full QLD Department of Transport inspection and is ADR compliant, and comes with all necessary paperwork.

The vehicle is currently registered and is located in Brisbane - Southside.

Engine Modifications:

Large Trust front mount intercooler

Front mount oil cooler

Relocated oil filter kit

Trust Blow-Off valve

Performance braided hoses (Pirtec)

Greddy intake plenum

Nismo 850cc injectors

High volume Walbro fuel pump

Apexi variable fuel regulator

HKS 264 cams (exhaust and intake)

HKS exhaust cam gear

Nismo de-compression plate

VG30 Airflow meter

Cold Air pod and polished enclosure

Trust high mount exhaust

3.5 inch Japanese Nismo exhaust

Garrett ball bearing GT35R turbo

Turbosmart external 58mm waste gate

Cusco brake booster

Earthing leads

Voltage stabiliser

Custom detailing (pearl, chrome and polished)

Apexi AVCR boost controller

Apexi SAFC

Apexi Power FC and Apexi commander

Splitfire coil packs

Large polished aluminium radiator

GTR water pump pulley

Three auxiliary electric thermo fans

ADR approved polished catch can

R34 GTS-t Block with R33 Head (less then 30 000km)

All belts replaced (Timing etc)

Driveline Modifications:

Locked 4.3:1 differential (std is 4.11:1)

Solid differential cradles

C’s Short shift kit

HiCas Lock bar

OsGiken Twin Plate Clutch

Suspension and Brakes:

Tanabe coil overs (adjustable)

GTR N1 rear sway bar

Front and rear strut braces

Caster rods

Wheels:

235 and 255 /55/17 Advan Racing wheels

Exterior Modifications:

Full body kit

Custom Impul front bar

Custom rear wing

Series 2 tail lights

Window tinting

Interior Modifications:

Black leather front race seats (ADR approved and Blue plated)

Black leather customized rear seat

Black leather custom rear parcel shelf

Black leather door inserts

Black leather gear shifter boot and handbrake boot (Issota)

Black roof lining

Black 2 pac gloss series 2 dash

Blitz Temp gauges - Exhaust

Blitz Temp gauges - Oil

Blitz Temp gauges - Water

Nismo dash gauge pod

Chrome door handles

Black Leather Nismo sports steering wheel

Audio Modifications:

JBL DVD,CD,Tuner,MP3 - 6channel, head unit

6.5 inch KIT6.5 front splits

6.5 inch Alpine splits (rear)

2 x Orion 10 inch dual voice coil Subs

1.2 Farad Capacitor

Alpine 4x100 RMS Amplifier

Audison monoblock 900 RMS amplifier

7 inch rear TV screen

Custom leather finished sub enclosures

Custom leather finished boot

Custom leather finished rear parcel shelf with enclosed speaker boxes

C.A.M three point alarm (Insurance approved)

Please contact me via mob:0414 575 676 or at [email protected]

Thank you

Link to comment
https://www.sau.com.au/forums/topic/253031-highly-modified-r33-gts-t-350rwkw/
Share on other sites

Anodised ally nuts used on number plates. Each hand drilled to fit stainless allan key bolt. Each one (set) will set you back about $5. There are about 100 in the engine bay. Adds up quickly.

All about doing the job right.

weekly bump.

Guys, this car is scheduled to be stripped back to stock in two weeks.

I really don't want to undo the huge amount of work done on this car, it would be a real shame. BUT it needs to go as I have tooooo many toys.

For only a couple of extra bucks then a stock R33 you get a low km engine with EVERYTHING, nearly $60,000 spent on modifications. Car owes me almost $90,000 but must go, nowhere to keep it.

PS. If not sold, ALL parts will be available for sale in three weeks. May or may not be posted here so contact me if you are interested in anything specific.

T - 0414 575 676

PM sent.

Extra info:

Car is currently registered, can supply RWC for QLD buyer.

Chassis has about 175,000km.

Engine bought from Japan with 25,000km.

All mods and parts changed are less then 5,000km.

if/when you part out i may be interested in the following;

-Turbosmart external 58mm waste gate

-Greddy intake plenum

-Apexi Power FC and Apexi commander

and possibly the top mount manifold that you used.

please pm me with prices or contact as i will forget to check here.

MUST SELL - this toy must go or it gets stripped back to stock on the 6-8 Feb 09.

This week only $18,500 as is. First to make deposit gets this toy. You can't build this car for less then $35,000 and owes me almost $90,000.

Must go, call me on 0414 575 676.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...