Jump to content
SAU Community

Hand Brake Button

adam1982
 Share

Recommended Posts

adam1982 Enthusiast

adam1982

Posted
Posted

Hey Guys,

Most likely this is a silly question, but when I got my 33 from JAP it came with a "Funky Blue" "drift" hand brake button. I've managed to get that off and source a replacement hand brake (Couldnt buy just the button)

now on my hand brake, it was quite simple, unscrew the button and it came off, on the replacement one however, i cant unscrew it and theres a c clip around the button but for the life of me i cant get it out and i dont want to pull any harder incase i break it?

So my question is, how the heck do i remove this button from the replacement hand brake and then fit it to my existing hand brake??

Sorry for the stupid question, but thanks in advance

Adam

Link to comment
https://www.sau.com.au/forums/topic/253104-hand-brake-button/
Share on other sites
jazzy_j Community Regular

jazzy_j

Posted
Posted

If the replacement handbrake you've got is the same as yours it might be easier to remove the centre console and replace the whole handbrake lever. I don't know about R33's but R32 centre consoles are easy to remove and if you can't easily get the button out that's what I'd do.

stenve Proficient

stenve

Posted
Posted

id like to know this also.

ive got that stupid drift button on mine so bought a replacement handbrake couldnt figure out how to remove the buttons so pulled the whole center console out and removed the handbrake... only to realise that you cant get the cable out because of the nut/screw thing at the end.

as far as i could figure it out you would need to remove the entire cable and slide the cable back through the new handbrake from the rear end.

i haven't actually looked at it yet but im pretty sure most handbrakes are crimped on at the rear wheel.

so if anybody could shed some light on this that would be fantastic :wave:

adam1982 Enthusiast

adam1982

Posted
  • Author
Posted

Lol glad to see im not alone!

I've hated that drift handbrake ever since i got it and its been the bane of many "Rice" comments lol

Now i've got a replacement black button (original) i just need to know how to put it on :D

Projectile Collaborator

Projectile

Posted
Posted (edited)
Lol glad to see im not alone!

I've hated that drift handbrake ever since i got it and its been the bane of many "Rice" comments lol

Now i've got a replacement black button (original) i just need to know how to put it on ;)

Do the 'drift' handbrakes actually do anything different performance wise or do they just look 'ricey'?

(Personal Opinion, I'm not fussed)

Edited by MahZaR
32_Dave Mentor

32_Dave

Posted
Posted

there just to make it easier to rip the handbrake when drifting. with a d-button u dont have to worry about pressing it in, whereas a normal button u do have to press it in. whatever floats your boat, both buttons do the same job in the end and who cares if its considered rice or not, spray it black if u care so much

stenve Proficient

stenve

Posted
Posted

mine came with the car, not my thing at all.

problem is mine doesnt sit in properly, pops out while driving, takes a few goes to get the handbrake on.

cant figure out how to swap them. but havent tried anything apart from what i mentioned in my first post.

adam1982 Enthusiast

adam1982

Posted
  • Author
Posted

mine came with the car from japan too, it used to free spin but not unscrew. i could never find a way that it would lock out like a proper drift button and then one day it just came off completely and wouldnt go back on, hence wanting to put the replacement back on..

any one out there have any ideas on how to put a button from one handbrake onto another one??

adam

adam1982 Enthusiast

adam1982

Posted
  • Author
Posted

I tried to get what i thought was a c clip off last night. It's not a c clip per-say

its more of a c barrel. it looks like a c clip from the top, then you start pulling on it and notice that it extends down under the hand brake. its like a tube but in the shape of a c-clip

any more ideas?? surely some one has pulled one of these apart or off before?/

Ta

Adam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R34 GT-T cycling ABS pump

      By MBS206 · Posted

      The team at OBD2 Australia are pretty good, shoot them an email and ask them. I've dealt with them before for work stuff. I'd be shocked if it didn't work, so long as Consult can activate the ABS. But you might need to use KLine for it which would be the stopper, as I don't think that piece does KLine comms.
    • Dose Pipe Sutututu
      R34 GT-T cycling ABS pump

      By Dose Pipe Sutututu · Posted

      Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • TurboTapin
      CD009 RB Conversion

      By TurboTapin · Posted

      Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
×
×
  • Create New...