Jump to content
SAU Community

Respray


Recommended Posts

Guest CleanAndSimple

First off ill apolagise for starting a new thread. :D

Recently been getting ever so more and more pissed off with bad blends here and there, and thinking about getting a respray.

questions are what price am i looking at?

thinking either full respray (body, engine, boot, cabin etc)

or

like shut door, considering im doing the same colour.

thoughts?

any idears on price?

and where does a good job?

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

If you are as picky as me, I'd be budgeting atleast around $8000 for a full respray. Means all windows come out, all new seals etc. Some good workshops around... All Type Crash I've heard good things about, I use and SWEAR by All Make Crash.

Had a very bad experience with one of the "big" workshops here in SA, I won't name them but I definately wasn't impressed with their workmanship.

End of the day, it all comes down to how deep your wallet is and just what you consider a "good job"

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4377429
Share on other sites

How much money u got to spend?

Would u wanna sand back the car yourself?

resprays can range from 3k to 12k

My recommendation is Edwardstown custom body repairs if u got the money to spend. Or if u wanna sand it all back yourself my mate who works there might be able to do a cashy on the side.

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4377427
Share on other sites

yeah 3k wont get you much these days, as with an old car like a 33 things are usually perished or very fragile when you remove them, and tend to break.

Even materials along cost abit, sand paper, prepsol, primer,paint,clear, nuts/bolts everything has to be taken into account.

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4377436
Share on other sites

Like Luke said, for 3k you won't get much... My saying is, if you are gonna do it, you might as well do it properly. Imagine how pissed you'd be spending 3k only to get a finish you aren't happy with?

Money down the drain isn't it, and back to square one

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4377442
Share on other sites

do you really need a respray or a really good detail? I'd be willing to give it a go cheap if the paint isnt destroyed already? save you a bunch of money, I redid mine after I priced the respray...lol and I'm picky ..lol

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4377516
Share on other sites

yeah 3k wont get you much these days, as with an old car like a 33 things are usually perished or very fragile when you remove them, and tend to break.

Even materials along cost abit, sand paper, prepsol, primer,paint,clear, nuts/bolts everything has to be taken into account.

old car?33? lol your car's only 2 years younger than mine. hehe bite your tongue

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4377654
Share on other sites

Although I haven't had any experience with them Tom Howard did a good job of colour matching the orange/gold pearl when Flick got the fibreglass guards painted.

Tom Howard did a good job colour matching part of the underbody with my side panels ;)

and All Type Crash... I'm not too keen on going back there.

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4377705
Share on other sites

i wanna get my dato done but im fearing the figure theyll throw after seeing the rust n bog areas :blink:

anyone know a apprentience painter that needs a practice car? i dont really care if the dato's not perfect aslong as it doesnt fall apart from rust :P

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4378038
Share on other sites

This is from another thread, im to lazy to re-write it :blink:

If you are after a full respray its gana cost you around 8-10k. If you take out the motor and interior and prep that in 2pac primer it will be around 5k. If your good with a spray gun i would paint the engine bay,cabin and door jams in the colour you want and that will be around 2-3k to finish the job. If your good with body work i would take it further and prep the outside in 2pac primer and that will be around 1k to paint the outside.

these are prices from some of Adelaide best places

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4378133
Share on other sites

Don't think he does powdercoating ... not that I was aware he had the equipment.

Looked at that link, the map is slightly incorrect. His 'shed' is at the right hand bend of Chapman Road on the left ... furthest shed in the corner of the lot. There is a chroming specialist next door to him. One stop shop :P

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4378665
Share on other sites

he powdercoats rims too doesn't he Ruby?

http://www.yellowpages.com.au/bi/daniel-st...sa-5608307.html

No he doesn't, but he does a good job of painting them, im very happy with the way my rims turned out :laugh:

Link to comment
https://www.sau.com.au/forums/topic/253273-respray/#findComment-4379995
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...