Jump to content
SAU Community

Recommended Posts

Hi again guys and girls.

Firstly every one who has replied to my previous topics, thanks.

Can some one tell me why whenever i give my car( R32 GTS4 Turbo) full boot i get full boost and get an intermittent backfiring. I've got new Spark Plugs gapped to 0.8mm, New Splitfire Coil Packs, and Running 11PSI.

I'm thinking my car is running way to rich!!

Other mods- Turbo back Exhaust, pod filter and HDI Boost Controller.

Any help or advice is well received.

Mark :(

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

yeh, got a bov. forgot about that.

Car has not been tuned, as i've been told by x-speed that the won't tune factory computers, i haven't bee n to any other performance shops yet though, so help with that would be good

no loss of power although does feel a sluggish occassionally. if i jsu raise the foot off a lil bit all is good again...

yeh, got a bov. forgot about that.

Car has not been tuned, as i've been told by x-speed that the won't tune factory computers, i haven't bee n to any other performance shops yet though, so help with that would be good

no loss of power although does feel a sluggish occassionally. if i jsu raise the foot off a lil bit all is good again...

Theres your problem, you should take it to another workshop.

Where abouts are you located. If its not to much of a hassle take it to hyperdrive. Andrew is very helpful.

I'm living in Leeming at the moment, soon to be living in Thornlie.

Ah ok, i was under the impression that i need a retune at some stage. Hyperdrive, any others that people know of??

hehe, i thought x-speed were not as good as they make out to be, expensive to!!

depending on how far you want to go with the car.

If you only want to keep it mildly modified

Just get it remapped or nistune from hyperdrive. You probably wont get much or if any additional power but the car will function perfectly.

depending on how far you want to go with the car.

If you only want to keep it mildly modified

Just get it remapped or nistune from hyperdrive. You probably wont get much or if any additional power but the car will function perfectly.

cool, cheers dude!!

If i wanted to take things a lil further wat u recommend??

Just get yourself an R33 series 1 turbo, and a stock ecu flash tune.

Whats that like $700 or less?

I dunno how much the R32 ECU retune costs. But a stock R33 turbo is about $300?

Edited by SKY RYAN

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That could be drilled, ground and welded. Would stop it progressing and leaking. But that block shouldn't be pushed very hard, as what you see there is a massive warning sign. But that fix also isn't going to happen properly with the engine in the car, and assembled. So you're looking at anew block if you're doing all that work anyway.
    • It's not as simple as it is being made out to be. It s not hard, but there are things that have to be done. Am busy right now, but will try to essay later.
    • Pinout is different to my knowledge, but you should confirm to be sure. Also you will need to adjust the VQ table in Nistune to suit. I would still recommend sticking with recirculating BOVs, I'm not sure if the R35 card MAF will fully resolve stalling caused by reversion/throttle lift.
    • What issues are those? Previous owner said it wants to stall sometimes. We did test drive and it was nice and smooth so it will be sporadic or idk. And if i just change MAF(the sensor to R35 version) it should be better? And as i asked...is it like "plug n play" with oem MAF from R34?  This is a MAF from R35 right?
    • Even with no BOV you will have issues unless the MAF is a hot film type like the R35 which has some design features to deal with reversion. Hot wire MAFs are very sensitive.
×
×
  • Create New...