Jump to content
SAU Community

Recommended Posts

alright so im thinking about buying a r31 but im not quite sure what i should be looking for??<BR>what im after is a cheap r31 that i can weld the diff and mabey do few mods so i can get into drifting at a beginers type level.If i was to buy a rb30de how much  work would i have to do to it to make it kick out sideways around corners with a boot of the clutch (make it driftable)? i wanna spend bout $2000 for a clean stocker but how cheap could i pick up a turbo r31 for ? cause if i could get one turboed for 4-5 grand i would rather buy one straight out than doing it all my self.<BR>and which model is the best thanks for any info

Link to comment
https://www.sau.com.au/forums/topic/254114-thing-bout-r31-need-info-plz/
Share on other sites

buy a stocker

lock the diff

then drift that simple

ive done it before for 200 bucks

but around the 500 should get you drifting

clutches are the pricy part if you get a good one you can go for ever

if its f**ked budget 250 bucks to kick arse

so 500 should have you at the track drifting

1500 if you cant weld 3k if your f**ked and dont know what a spanner is

Dual rear sway bars is a good cheap upgrade for drift if you can pick up a sway bar at the wreckers... 31 turbos can go for as low as $2500 I guess.... seen some really nice ones for 5k. Model doesn't matter much, the S3 looks "newer" and has the sexy hotplate rear lights but other than the auto trans not much changed between models, and obviously you'd want manual.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...