Jump to content
SAU Community

Recommended Posts

2x stock R32 dump pipes. $20ea? fit 33 too

stock front pipe for 32/33 $25

1x stock R32 cat converter - mesh still in reasonable nick $30

*will do a dump/front/cat combo for $50 if someone wants all three*

Universal rear muff, looks like 2in inlet. good condish. $50

s5003521jg2.th.jpg

Stock RB20 turbo, dunno kays - minor shaft play, no actuator - $80?

s5003517df2.th.jpg

Stock R32 front upper arms with what look like aftermarket urethane bushes - $50

s5003518jr9.th.jpg

Stock R32 RB20 cooler and some of the piping - $20

s5003519xo9.th.jpg

5 stud 20mm spacers, hubcentric. $90

RB20 AFM - not really sure what these are worth. In good nick, with mesh and stuff still intact. Putting $125 on it.

s5003524jm5.th.jpg

3 pairs of wheels, all 5x114.3

16 x 8 +38 Watanabe $160

s5003527cj8.th.jpg

16 x 8 +20 SSR 5 spokers $220

s5003531xc8.th.jpg

16 x 9 +13 VIP style $280

s5003529ry6.th.jpg

*I can have the tyres swapped onto one of the other pairs for an extra 20 bucks - 205/45/16 Federal SS595 (the ones currently on the SSRs)*

*DEAL OF THE YEAR :down: - if anyone wants ALL of the rims + the spacers, will do all that shit for $500! Just need to remove these rims from my house :)

Located in SA, nearish Mt Barker. Not real keen on posting shit, maybe small/light stuff.

Link to comment
https://www.sau.com.au/forums/topic/254795-rims-and-stock-r32-parts-fs/
Share on other sites

They look like this but the edges are black so they don't stand out as much. Threads are tip top condish and they come with 10 wheelnuts too.

post-4456-1206943282_thumb.png

Will post to Melbs but will pass whatever it costs onto you.

hey mate got a mobile number? very keen on the spacers iff still availible.

plus im in Hahndorf. :ermm:

Spacers spoken for pending payment, but if that doesn't work out you'll be the first to know mate.

i'll take the front pipe, are you free tomorrow?

my number's 0403011361

msg when ya free

cheers tys

SMS'd :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...