Jump to content
SAU Community

Recommended Posts

Hey all,

I've had my skyline r33 s2 for a while now, and just recently it seems the transmission isn't using the gears it should be. Eg. when taking off it tends to go in 2nd gear rather than 1st, and sometimes it just seems to rev higher but doesn't engage the right gear...

Anyone know what this might be?

ALSO i have considered to put a shift kit in soon, would this aid to fix the problem by any chance?

Also what stage shift kit do you recommend? (It's an everyday driven car)

Cheers in advance!

Link to comment
https://www.sau.com.au/forums/topic/255338-r33-auto-gearbox-questions/
Share on other sites

go a stage 2 like i did and when you get it back and go for a drive you will be like "This is f*kn Mad hey".

honestly best bang for bucks and you will really notice the difference no more sliding into gear and you will get 2nd to 3rd gear chirps from a auto depending on your power level.

i loved it straight away $400 bucks you cant go wrong.

give mike a call at m.v automatics for any questions like the bloke above suggested.

Edited by R334door(s2)

Cheers for the advice!

Ive tried someone more local but will be putting shift kit into it once they have a look at it.

Hope i'm not looking at a rebuild, the gearbox has about 80,000kms and seemed fine before a week ago..

  • 2 months later...
just curious, whats a stage 2 kit? whats it consist of?

Hey mate i had my auto re built by steve buchard, all the gear in it with a full manual valve body, and he guaranteed it for 950hp its the bees knees wouldnt look back. it cost $2800

  • 3 weeks later...

quite the opposite. the slower softer shift of the stock gearbox are actually slipping the clutches on purpose for "comfort". slipping clutch = friction = heat = dead gear box. with a shift kit and tranny cooler your box will last longer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...