Jump to content
SAU Community

Recommended Posts

Have a rb25det neo and have purched Tomei Poncams 260degree 9,15mm lift.

And Tomei valve springs type B with Retainers for the intake side why not for the exhaust side aswell??

And do I have to shims the lifters if so How do I do? Any pics?

What is the part number for the springs you have purchased?

Do you have the equipment to change the springs and is the head on the block or off it?

What is the part number for the springs you have purchased?

Do you have the equipment to change the springs and is the head on the block or off it?

163022 is the part number

Yes I have stuff to shange the springs the head is off.

Edited by Mikael Jansson
163022 is the part number

Yes I have stuff to shange the springs the head is off.

I'm pretty sure that number suits R33 RB25DET, Not Neo.

Correct me if I'm wrong.

Also I don't think springs are required for a 9.15mm lift upgrade on a Neo either.

I'm pretty sure that number suits R33 RB25DET, Not Neo.

Correct me if I'm wrong.

Also I don't think springs are required for a 9.15mm lift upgrade on a Neo either.

The springs suits rb25det with solid lifers and I have that stock on my neo so I think it will fitt??

OK but how do I now if I have to shims or not?

The springs suits rb25det with solid lifers and I have that stock on my neo so I think it will fitt??

OK but how do I now if I have to shims or not?

These springs will NOT suit your application, they are designed by tomei to work with the solid lifter conversion for an r33 RB25DET not a neo, and honestly your better off spending your money on a set on i think its performance valve springs.. much cheaper and work just as well if not better, the yen is shit and anything from japan is stupidly expensive at the moment.

The springs suits rb25det with solid lifers and I have that stock on my neo so I think it will fitt??

OK but how do I now if I have to shims or not?

Exactly what Cartman said.

These springs are for the 33 RB25DET with solid lifter conversion. They do not suit Neo.

What part number did you get for the camshafts?

i had a solid conversion kit and it included the same springs with only one side of retainers.

You should stay with the hydraulic lifters and save the hassle.

its a neo you dingis . how can he stay with hydraulic lifters if he never had them in the first place?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...