Jump to content
SAU Community

Recommended Posts

Hey all,

Garage clean out time, I have the following available in Hobart - Prices negotiable (I just had a bit of a guess as to what they are worth)

R34 GTR Wing + bonus R32 boot lid in black $300

Image087.jpg

http://i74.photobucket.com/albums/i263/med...ve/Image088.jpg

Looks to me like a copy wing, not 100% sure, but it does have the adjustable blade. Bonus R32 boot lid if you want it, if not I can remove it

R33 GTR Passenger seat $200

Image095.jpg

No rips or tears, could do with a quick clean and it would come up nicely

Swap: Recaro drivers seat for a stock R32 drivers seat. I want to go back to stock with mine (dont ask why - I dont really know myself)

It has a few tears in the usual places, nothing major - just a bit untidy, would be ok in a dirty drift car or whatever :) I will put some pics up tonight

Shoot me a PM and I will give you a call*, or I will give you my number and we can work out details. Cheers Guys

Dave

*Im not on a lot over the weekends, but I will reply ;)

Link to comment
https://www.sau.com.au/forums/topic/255791-fs-r34-wing-r33-gtr-seat/
Share on other sites

Quick note: the wing must be a copy - the adjustable flap is not carbon, its just painted black!

Actually, hold on a sec - is the blade CF, or is it just the end plates? or whats the best way to tell a genuine one.... Where's that search button!

Edited by Medium Dave
  • 4 months later...
  • 9 months later...
  • 3 months later...

hi mate, sorry for digging up an old thread, i found it whilst googling, just wondering if the wing ended up getting sold or not?? if so would you or anyone else on here know where i can pick up a stock R34 GTR wing. cheers guys

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...