Jump to content
SAU Community

Recommended Posts

Hey guys,

i might be scoring dads unused Supercharger for the Z...

just wondered what mods i need to run 5-6psi boost on stock engine with a intercooler.

i aint to sure what the stock injectors/fuel pump can handle/ what the ecu can do as in being tuned...

;) thanks

Link to comment
https://www.sau.com.au/forums/topic/256506-supercharging-a-350z/
Share on other sites

Mr Gazza, As part of the HKS kit, both the fuel pump and injectors are upgraded, as there isn't much additional headroom in them. You'll also need something to control the fuel/timing as the stock computer won't handle the changes well.

vq35 vipec's plug ins are in development , v88 wire in would work right now although you would be the test guinea pig to calibrate the drive by wire (or ditch it) . stock ecu remains to talk to the bcm to control all non engine car functions .

be wary of the supercharged stock internal vq , they make a bucketload of low down torque even at small boost and are prone to hurting rods . even a basic rebuild with some forged stuff might be a good idea if for longevity if nothing else.

will be an awesome engine though , so responsive .

Edited by autoworx

Hey guys,

yeah i wont be aiming for high hp, just enuff to piss on 6-7litres common-dores.

I've raced this dude in a yellow VZ 6litre HSV 307kw with a bucket load of mods, i had him by a few feet both on the lights and rolling pulls!

:) think i'd be happy with 5psi

i been reading stuff like this... which makes me think you can just bolt it on pretty much?

Yeah i'll call C-red n that see what they can do / reccomend.

Still open to ideas ect.

_______________________________________

Manufacturer: Stillen

Manufacturer's Web Site: Here

Type of Supercharger: Twin-screw

Additional Modifications Required: New hood that will clear the supercharger. These are offered by Stillen as well as other companies.

Price:

Stage 1 - $3,795.00

Stage 2 - $5,239.00

Stage 3 (Pulley Only) - $89.00

Stage 4 - $849.00.

Approximate Installation Time: 10-12 hours.

Future Plans: Stillen is reportedly developing a larger blower. They are being tight-lipped about it, but I was told it will work with the same hoods that work for stages 1-4 and most of the Stage 4 components. I would say it will have to be an M90. It will probably also have a larger intercooler. All of this will bump up the power quite a bit. The new upgrades are expected to be completed by the end of 2006.

There are 4 stages:

http://www.stillen.com/superchargers..._Guide_USA.pdf

Stage 1: This stage features the base supercharger with 6psi of boost. It includes everything needed for installation.

Stage 2:This stage features the base with 6psi, and it adds an intercooler as well as a heat exchanger with a coolant pump (with its own coolant) placed underneath the superchargerand.

Stage 3: This stage replaces the base pulley with a small pulley that increases boost to 7psi.

Stage 4: This stage features a new fuel pump, a larger 7th fuel injector, smaller pulley and remapped FMU (Fuel Management Unit) which increases boost to 8.5psi.

Mr Gazza, I personally wouldn't rely on what Stillen post on the internet, go talk to one of the tuning shops that have supercharged a Zed (C-red or Xspeed) and they'll have alot more useful info of what is required. I agree with Autoworx that the VQ35 isn't a strong internal engine, unlike the VQ30, so don't chsae too much power.

Cheers

Paul

With the HKS S/C on my V35 it was good enough for 312rwhp on only 6psi boost.

Internals were fine for street use.

Same power and less weight than a HSV you do the math :-)

S/C less likely to harm rods than a turbo setup

Edited by R34

:D Thanks all so far for your input, more is still welcome!!

Hey Chris, so u have you Supercharged yours / or someones 350z?

I just really want to know if all the stock stuff will be okay 'ecu/fuel pump/injectors' and can the stock ecu be tuned? i cant seem to find anything.

But i am calling C-red tommorw, i had to get valentine stuff today so had no time!!

And guys as i have stated a few times, i dont want 1000000 RWHP or my rods ect getting thrown through and out the side of block LOL !!

Its pretty quick as it is and most things cant beat me.

I just want it for a bit more power / BOV and yeah cause i can :)

i was going to go the same way, to supercharge the v35 but got quote 14k (including labour cost etc) and this was through with vortech. one of the members JaiK before had one for sale and it seemed mint so i wanted to do what he did. he managed 360hp and 1/4 was under 13s. he did his at c.red.

but in the end...i spent the money buying another car :(

i'd rather turbos bro coz they force induct and hold boost on, but lots more work involved aswell as cash aswell... s/charger is bolt easy induction mod really... takes few % of power you gain coz the pulleys n that!

still deciding and getting ideas myself

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...