Jump to content
SAU Community

Recommended Posts

Have all these random bits and pieces taking up room in the garage since I sold my R34 GTT coupe:

Big items are pick up only in Sydney (from Winston Hills or Bonnyrigg). Will only post O2 sensor, coilpacks, Apexi RSM, and horn.

R34 GTT SMIC intercooler - excellent upgrade for R32/33 - $200 - includes everything in photo.

DSCN2995.jpg

R34 GTT Radiator fan - as new condition - bought from a wrecker for $130 and never got around to fitting - $60

DSCN2997.jpg

R34 GTT stock exhaust - includes dump pipe, center pipe, cat, most gaskets,heat shields, most bolts - $100

R34 O2 sensor - as you can see from above photo I had to cut the wires to remove so you need to solder back up (or I used

connectors). Works fine. $40

DSCN3004.jpg

R34 GTT coilpacks - The story with these (as I dont want to rip anyone)...when the car got imported it was running rough and a

mechanic decided one of the packs was dead (this was thrown out) and replaced with a second hand one. This didnt work as car still

ran rough so he absolutley coated them all in the high temp silicone stuff. Car still ran rough so I bought new Splitfires (as I

needed the car for work). This fixed all my idling issues. Thus I still have these 6 factory ones. I know at least 4-5 of these

are "good", maybe one or too bad ones but I can't guarantee anything and I don't have time to test them.

So $60 for all 6 and they are yours.

DSCN2999.jpg

R34 GTT horn - removed to fit aftermarket intercooler - $10.

DSCN3002.jpg

R34 GTT drip tray - $10

DSCN3003.jpg

Also have an APEXI RSM GP with Apexi stand and G Sensor and user manuals in very good condition - its listed on EBAY here: (may take decent

offers from SAU members before auction ends).

EBAY LINK TO APEXI RSM

DSCN3006.jpg

You can email, PM or post here.

Thanks Tony.

Edited by merlin6014
hi, does everything needed to install RSM come with it? how much are you after?

Yes mate includes absolutely everything (the wiring harness is even extended so it should reach all the way to the computer in the passenger footwell if your mounting it near the steering wheel).

Fairly easy to hook up you just splice into the wires in the footwell - all the instructions (and wire colours) are in the user manual (included) - took me under an hour (all you need is pliers, some electrical connectors and tape) otherwise a mechanic can hook up for pretty cheap.

You can buy it now for $200 otherwise you can bid for it via the link to ebay - its currently at 6 cents...

Edited by merlin6014

Did not mention in first post I will also post radiator fan Aus wide for $7.50.

Horn is on hold.

Everything else still for sale and negotiable on most.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...