Jump to content
SAU Community

Medium Compund Semi's

Snowman

By Snowman,
in Motorsport Discussion & Builds

 Share

Recommended Posts

phunky_monkey Grand Master

phunky_monkey

Posted
Posted

From what I've seen in 17's the Dunlops have also been a fair bit more than the RE55s. The prices are out of control... I need an alternative...

Harry: The RE's vary quite a lot here too. The 235/45/17 was always about $50 or so cheaper than the 235/40's from memory, just depends what is the more common tyre.

Snowman Grand Master

Snowman

Posted
  • Author
Posted
The Dunlops might last twice as long?

Unfortunately, I think Dunlop is aware they have the fastest current tyre, and are pricing them accordingly :(

The thing is I'm not actually convinced the Dunops are any faster in the dry (Infact I reckon the RE55 SR2's might be a touch faster) - but the Dunlops are a LOT faster in the wet from what I've seen.

Either that or I'm just completely rubbish in the wet. LOL :)

hrd-hr30 Grand Master

hrd-hr30

Posted
Posted (edited)
Harry: The RE's vary quite a lot here too. The 235/45/17 was always about $50 or so cheaper than the 235/40's from memory, just depends what is the more common tyre.

the thing is other tyre manufacturers manage to do these 2 sizes for pretty similar money. Kumho $435 & $465, Bridgestone $448 & $457. Dunlop $465 & $560? their 245/40*17 price is bizarre!

so I don't think its that they are charging more because they know they have the fast tyre. The 225/45 is actually pretty close to the other brands. its just that some sizes are disproportionately over-priced. or maybe some are disproportionately under-priced?

Edited by hrd-hr30
Downforce Grand Master

Downforce

Posted
Posted

TT compound RE55's go off pretty quick... 2-3 hot laps and they start to go off. Stick with SR. Fark me the distributors are hiking prices up... greedy kents. It's not bridgestone putting the massive price increases, it's the 10 or so distributors in Australia. There is just not enough demand for these tyres, so bridgestone don't care if they bring more RE55's in or not. Thank god for subsidised workshop sponsorship :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      S1 rb25/s14 starting problem

      By Dose Pipe Sutututu · Posted

      When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • PranK
      My BMW E39 528i touring

      By PranK · Posted

      Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • CRSKmD
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By CRSKmD · Posted

      yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...