Jump to content
SAU Community

Recommended Posts

Nope. He's booked it in for a couple of months at the shop ;)

lol ;) ....wut :( ?!

Anyway speaking of which, i need to grab your contact number, and a price on how much you are charging me to have this stuff installed...so i know how much not to spend.

  • Replies 881
  • Created
  • Last Reply

Top Posters In This Topic

I'll get my mechanic mate to do most of it as he's knows more about doing it then me. Price I don't really know. Maybe ask boostworx how much they charge and we will beat it. Only thing we can't do is the tune lol

speak more about it when I see u next.

I'll get my mechanic mate to do most of it as he's knows more about doing it then me. Price I don't really know. Maybe ask boostworx how much they charge and we will beat it. Only thing we can't do is the tune lol

speak more about it when I see u next.

which reminds me lukey.....my turbo needs to go on soon as well....so let me know of the costs involved :)

lol, dude, diy. only reason mine took so long is im f**king lazy.
Yep, easy on a single turbo car, GTR on the other hand = PITA!

If you want Krishy, I can lend a hand

Does it need to be on a hoist??? if so then i can organise a time to borrow luke's hoist and that way there will be 3 or 4 or 5 of us trying to get it done lol.....i am very mechy challenged when it comes to things like this....will let you know when the pipes are all made luke

That should be fine if u guys wanna do that. Best if it's a Saturday arvo through to a sunday if u like.

Just let me know when.

once the pipes get made then we can sort something out

Does it need to be on a hoist??? if so then i can organise a time to borrow luke's hoist and that way there will be 3 or 4 or 5 of us trying to get it done lol.....i am very mechy challenged when it comes to things like this....will let you know when the pipes are all made luke

lol dude. mine was done on the floor of my garage with a 50 buck jack, and 40 bucks worth of stands.

hoist would make it marginally easier, but its not necessary.

lol dude. mine was done on the floor of my garage with a 50 buck jack, and 40 bucks worth of stands.

hoist would make it marginally easier, but its not necessary.

yeah that plus i got no tools.....so makes life a whole lot easier

youd be about the only skyline owner i know without a took kit. :banana:

just need a simple socket set, couple spanners, and maybe a breaker bar.

speaking of hoists though, might make my engine mount replacement a whole lot easier...

yeah I did my turbo changeover on jack stands .... actually can make it a bit easier to get those damn fiddly banjo bolts lined up when you sit under the car and jam yourself whilst contorted into the position you need to be. But yes, I still think overall a hoist would be much easier.

Yeah and +1 to wtf on no tools .... how can you own one of these forever being modded and breaking down pos's without a huge box of tools? :banana:

Guest
This topic is now closed to further replies.



  • Latest Posts

    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
    • I have an elite 2500 running an adapter harness on an rb25de neo r34. I took the butterfly out and removed all that junk. But I also went Plus+t at the same time. The butterfly thing works in reverse to the boost solenoid on the Gtt if that makes sense
    • yeh they are 235/45/17 up front and 255/40/17 in the rears. I still didn't get my answer if i can fit a 18x9 up front. I want to get 4 of this and see if they will fit before committing as they didn't see an 18x8 as an option but there is a 18x9.5 also.   Enkei RS05-RR 18x9 35mm ET 5x114.3 75.0 Bore Matte Gunmetal Wheel
×
×
  • Create New...