Jump to content
SAU Community

Recommended Posts

Sorry Benny, no disrespect to your Who's Doing What thread, but I reckon *The Ultimate Tarmac Rally* deserves its own special thread with only 54 days to go!

So here is a spot to keep track of who is running/helping someone to run/helping the event run/helping by watching the event etc etc etc

And probably a spot for organising Tassie catch ups and piss ups... not to mention the resulting war stories.

Link to comment
https://www.sau.com.au/forums/topic/259637-targa-tasmania-2009/
Share on other sites

  • Replies 652
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

So I kick off.

Me and my blue steel profile pic are entry 803 in the Early Modern Competition.

GO CAR 803!

Navigating for Steve from Just Jap in the old school 32.

Guessing prep is well under control - no last minute Raceworx fix its or stick its required this year :)

what happened to the r35 ride?

me and dad are back in 895. planning to finish this year, didn't like earth moving last year

I said yes to the Just Jap seat straight after Targa last year before any of the rides in the 35s materialised.

Timing & subsequent luck aside I would have made the same choice I reckon- it's a good, fun, incredibly well prepared car and the new category is a bonus :D

Looking forward to Targa already- Steve and the team are bloody good value.

Just not quite sure how I will work out if we are on track with the touring stages this year- in other cars you always knew you were going the right way when you passed millions of kids in their Just Jap caps. Kinda like a dog marking its territory in that respect :rofl:

Looking forward to a beer with you at the finish this year Ben!

Daniel and I will be there in Car 128 for the first couple of days.

We'll be taking it one stage at a time.

Target 1 - finish a timed stage.

Everything after that is a bonus :)

I'm hoping PWR get their stuff sorted and I can have a test run at Sandown next week to find out if all the problems we discovered at TWP are sorted. If that all goes well the only thing I'll have left to do is to fix the scar on the front bar where the tow hook was ripped through at TWP.

Daniel and I will be there in Car 128 for the first couple of days.

We'll be taking it one stage at a time.

Target 1 - finish a timed stage.

Everything after that is a bonus :)

I'm hoping PWR get their stuff sorted and I can have a test run at Sandown next week to find out if all the problems we discovered at TWP are sorted. If that all goes well the only thing I'll have left to do is to fix the scar on the front bar where the tow hook was ripped through at TWP.

Did you get accomodation sorted Snowy?

Yeah we got a bed. Unfortunately Dan and I have to share it. And with another 2 guys - so pillow space will be at a premium, but we are told this is an accepted common practise down in Tassie so it will have to do.

It's not ideal obviously - but at least now I've learnt for the future BOOK WELL AHEAD!

:)

Well Phat Timmy and I are teaming up to hold hands in my little 32 GTS-t this year as most of you know :D I can't say how excited I am to be going back! I was really looking forward to navving for Russ in the big gun R35, but getting the Tarmac Magazine financial help and a big hand from Timmy the super-peakin-nav really tipped the decision to run the 32 :)

Biggest news is we're changing pace notes this year, Tim and I both figure we are really craving more information now, though neither of us have the time to write our own notes, so we're making the switch from 1 to 6 over to 1 to 10, with alot more info :) The extra information will hopefully allow us to keep the little RB20 up at a reasonable pace. We don't have the benefit of RB26 power and big clutch stabs this year to cover any small mistakes and get us back up to speed.

Car prep, well, my buddy Elmo and I have been hard at it..... so much for running a cheap race car! lol The car should be good though, it looks the part now, though there's plenty left to do. Corner weighting the suspension hopefully this weekend, making a skid plate tonight and fitting some extra gauges amongst a bunch of other stuff. Oh, and a couple of extra double seat grab bars for Tim :)

We're in category 7, late classic. So I asked nicely for number 32, for R32, so we're car #732 :)

http://www.targa.com.au/Competitors/profil...c%20Competition

Timmy's a hit with the ladies, "blue hair, blonde eyes" ;):)

Edited by Marlin
Well Phat Timmy and I are teaming up to hold hands in my little 32 GTS-t this year as most of you know :D I can't say how excited I am to be going back! I was really looking forward to navving for Russ in the big gun R35, but getting the Tarmac Magazine financial help and a big hand from Timmy the super-peakin-nav really tipped the decision to run the 32 :)

Biggest news is we're changing pace notes this year, Tim and I both figure we are really craving more information now, though neither of us have the time to write our own notes, so we're making the switch from 1 to 6 over to 1 to 10, with alot more info :) The extra information will hopefully allow us to keep the little RB20 up at a reasonable pace. We don't have the benefit of RB26 power and big clutch stabs this year to cover any small mistakes and get us back up to speed.

Car prep, well, my buddy Elmo and I have been hard at it..... so much for running a cheap race car! lol The car should be good though, it looks the part now, though there's plenty left to do. Corner weighting the suspension hopefully this weekend, making a skid plate tonight and fitting some extra gauges amongst a bunch of other stuff. Oh, and a couple of extra double seat grab bars for Tim :)

We're in category 7, late classic. So I asked nicely for number 32, for R32, so we're car #732 :)

http://www.targa.com.au/Competitors/profil...c%20Competition

Timmy's a hit with the ladies, "blue hair, blonde eyes" ;):)

So thats why you want me, not for my skills but my 'looks'?? haha!

Speaking of PWR, got that radiator yet?

Yeah got it last week. All in there, haven't gone test and flogging yet, but even idling with just a thermo fan it controls temp alot easier. :)

And yes, you know how it works, you're the bait and get them talking, but I'm "The Driver" and get "the glory"! lolol

Edited by Marlin
Yeah got it last week. All in there, haven't gone test and flogging yet, but even idling with just a thermo fan it controls temp alot easier. :banana:

And yes, you know how it works, you're the bait and get them talking, but I'm "The Driver" and get "the glory"! lolol

Pray for Rain Ben and drive it like dry.... those little 32's are the most confidence inspiring thing I have sat in... Still havent been as quick on some stages in the Evo.

And you are part of the family over here... never under-estimate just how special that is.

At this point its over and out for the X Bunnings mob... but never say never.

If we dont get to the grid, watch out for people in the bush. We do know the good spots, and rally spectating is an art.

Ciao

TT???(maybe)

Biggest news is we're changing pace notes this year, Tim and I both figure we are really craving more information now, though neither of us have the time to write our own notes, so we're making the switch from 1 to 6 over to 1 to 10, with alot more info :banana: The extra information will hopefully allow us to keep the little RB20 up at a reasonable pace. We don't have the benefit of RB26 power and big clutch stabs this year to cover any small mistakes and get us back up to speed.

I've been switching between 1-6 and 1-10 for the last few events and I haven't decided what I prefer yet.

I know some drivers actually driver quicker with the 1-6 becuase there's less info to process, and more marked differences in the corners?

Pray for Rain Ben and drive it like dry.... those little 32's are the most confidence inspiring thing I have sat in... Still havent been as quick on some stages in the Evo.

And you are part of the family over here... never under-estimate just how special that is.

At this point its over and out for the X Bunnings mob... but never say never.

If we dont get to the grid, watch out for people in the bush. We do know the good spots, and rally spectating is an art.

Ciao

TT???(maybe)

Not good to hear Greg - hope you can work on that never say never bit!

Pray for Rain Ben and drive it like dry.... those little 32's are the most confidence inspiring thing I have sat in... Still havent been as quick on some stages in the Evo.

And you are part of the family over here... never under-estimate just how special that is.

At this point its over and out for the X Bunnings mob... but never say never.

If we dont get to the grid, watch out for people in the bush. We do know the good spots, and rally spectating is an art.

Ciao

TT???(maybe)

Gee Greg, sorry to hear you might not make it mate, that really is dissappointing. You were having a good crack at Rally Tas too! Some good times there mate, punching well above your weight I'd say!

And sure thing, I DO feel like part of the Tassie family, easily some of the best people I've met down your way mate, in fact, I'd move there in a heartbeat if your weather wasn't so shithouse :banana:

I hope something changes mate and you guys can make the start!

Pray for Rain Ben and drive it like dry.... those little 32's are the most confidence inspiring thing I have sat in... Still havent been as quick on some stages in the Evo.

And you are part of the family over here... never under-estimate just how special that is.

At this point its over and out for the X Bunnings mob... but never say never.

If we dont get to the grid, watch out for people in the bush. We do know the good spots, and rally spectating is an art.

Ciao

TT???(maybe)

Will be sad to see you out Greg, but I wanna hear some of these in the bush in the unlikely event you don't make it to the grid! KLX32915X.jpg

I've been switching between 1-6 and 1-10 for the last few events and I haven't decided what I prefer yet.

I know some drivers actually driver quicker with the 1-6 becuase there's less info to process, and more marked differences in the corners?

Ive been looking over the samples ive got of 1-10 and I really do prefer them, but will see how we go come recce. I also prefer the Degree first then the direction (IE 5R as opposed to R5). I feel that the driver (not singling out benny here, but every video ive seen and every driver ive been with), listens to the first part of the call more than the second part, whereas if they here the degree first and they can see the corner they don't necissarily need to ask what it was again.

Ill open this up to discussion though cos I believe it only helps everyone!

I'm far from an expert (since I haven't even finished a timed stage yet) BUT for me in the short time I have been playing, when the corners are closely linked (which is when the notes are most important IMO - other than the DANGER DANGER DANGER bits as James likes to say. LOL) but when they are closely linked I find the most important bit of info is which direction the next corner is so I know whether to exit wide or keep in. So if I'm only listening to the 1st bit then I'd prefer the direction at that point.

But as I said I'm still learning so maybe that will change in time.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
×
×
  • Create New...