Jump to content
SAU Community

Recommended Posts

i cleaned my garage, now i got some stuff i wanna sell

r32 gtst wheels x4 (black) perfect condition, brand new nangkangs 225/50/16 (only 100k's old) = $550

r32 coilpacks, work fine $25each or the lot for = $110

r32 stock air box, perfect condition = $20

r32 stock brakes, front and rear calipers, and 4 x stock rotors .. (have a bag of all the pins pads ect too, ALL for = $120

r32 fiberglass eyelids, brand new = $25

r32 stock coilpack cover (black) = $10

r32 REAR BAR BN, originally the style was for a 180SX, ADRENALIN modified it to fit an r32 4door! looks nice.. very big CURVY & sexy bar, needs abit of glassing.. just on the rear support tabs, piece of piss to fix! = $80

Fujisubo Giken, jasma approved sports muffler, 3' inlet, 4-5' tip?, stainless, Seriously a nice muffler = $70

short shift kits, 3 x throw shifters, 1stock one, 1 aftermarket noname & 1 nismo short shifter, bits n pieces , its pretty much bits out of all three kits, pretty much the first person to come in will be able to make a full kit! out of the bits n pieces = so make an offer an be quick!

wheel spacers, 8mm x2, 3mm x 2 = $10 & $5

oil filter relocation PART-KIT, includes 3x braided lines, 2x sandwich plates, MISSING 1 dash fitting as i didn't receive it when i bough it lol, can get a new one made @ PWR 4 cheap as, all for=$140

Oil catch can, generic, chrome, has all the bits, never used = $20

rotor covers x2, gloss black, makes it look like a 2piece rotor, looks nice = $10

fmic, ROLLIN IMPORTS made, jap spec lol, bar & plate, perfect condition, has HKS sprayed on one side = $100

cheers jez

mobile: 0401 401 949

ALL PICS ARE DOWN HERE:

----> PICTURES OF THE STUFF HERE LOL! < ---

Edited by 32JEZ

not posting any shit out, cant be f**ked lol.. also.. wen we can arrange pick up or anything.. ill just make it at the BP / maccas in UPPER COOMERA ;)) (Y)

come on guys lol.. buy the wheels.. there $680 worth of just tyres there alone!! .. i still have the receipt!..it was only a few weeks ago i bought them from f1! these bad boys still have the little knobs on them and the writing on the tread lol.. brand new only did like 100k's!!!! ;) all balanced ect.. and the rims are in MINT condition, im only selling as i bought brand new 18's ftw!!! :D had stockies for 3 1/2 years :) *** also for anyone that didn't know takes about 1000k's to wear in a Tyre to get maximum p eek performance!

Edited by 32JEZ

there is only bits n pieces left man, still have the short shifter its self, but u need a few other little things.. u can have the bag for $5 or pick out anything thing u need... im at upper coomera

shiftkit.jpg

the red has been sold.. green is wat is left..so there is pretty much a full kit left.. u need 2 little plastic things..

here is another pic to explain lololol.. paint ftw!!!

DSC00115-1.jpg

you can prolly take off that middle ring off the stock shifter an put it on the aftermarket one too.. >_>

Edited by 32JEZ
  • 4 weeks later...


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...