leeroy_25 Posted March 9, 2009 Share Posted March 9, 2009 I have finished stripping down most of my RB26 donor engine rady to build up the B30.. I noticed when I took off the Oil filters there is a slight difference between the RB30 and RB26 block?? My RB26 is from an R33 and has a water cooled oil cooler that the filter then mounts to. On the RB30 the filter is direct onto the block. When you remove the cooler from the RB26 instead of having a thread, there is a lug sticking out that is a snug push fit inside the oil cooler housing (I assume this is to direct the oil flow correctly) How do I modify my RB30 block to accept the same cooler or is it easier/better to dump it and get a relocation kit and traditional type cooler? I am sure I have seen RB30's with the RB26 type cooler so presume it's possible? Thanks Lee Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/ Share on other sites More sharing options...
unique1 Posted March 11, 2009 Share Posted March 11, 2009 yes it can be done, i just unscrewed the fitting out of a rb26 block that has the slot in it for the oil cooler block and used that to screw in the place of the threaded one on the rb30, it screws straight in and works same as rb26. To get the 30 one out i ground a straight into it with an angle grinder and used a thin bar to unscrew it (was damn tight, might need to heat it with any oxy to crack the seal if its really tight), the rb26 one already has a slot in it so use a piece of bar that will fit in it and do the same. Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4471691 Share on other sites More sharing options...
T04GTR Posted March 11, 2009 Share Posted March 11, 2009 dont do it. they simply do not work when pushed. if in dought use a rb25de gts4 oil filter block instead. if its in a gtr. Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4471810 Share on other sites More sharing options...
unique1 Posted March 11, 2009 Share Posted March 11, 2009 (edited) what doesnt work? do u mean pushed as in making alot of power? ive never had an issue yet with mine, i have removed it from my other motor but redoing all the water lines etc under the plenum is a pain, well harder than just screwing the rb26 oil cooler on anyway. whats a gts4 one look like? Edited March 11, 2009 by unique1 Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4471822 Share on other sites More sharing options...
T04GTR Posted March 11, 2009 Share Posted March 11, 2009 im mean when your thrashing the car they do sweet fa in cooling the oil. the gts4 one is angled to suit the front diff. and when a sandwich plate goes on its much easier to work with. but you will need the 26 block fitting. basicly the same but without all the hoses and cooler in place.. Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4471848 Share on other sites More sharing options...
unique1 Posted March 11, 2009 Share Posted March 11, 2009 im mean when your thrashing the car they do sweet fa in cooling the oil.the gts4 one is angled to suit the front diff. and when a sandwich plate goes on its much easier to work with. but you will need the 26 block fitting. basicly the same but without all the hoses and cooler in place.. fair enough sounds like a good idea i didnt even know about the gts4 ones, thanks for the info Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4471893 Share on other sites More sharing options...
leeroy_25 Posted March 11, 2009 Author Share Posted March 11, 2009 cheers for the info guy's I have to say when looking at the blocks I thought the stub in the middle must be removable.. So I have two options.. Well three... RB26 oil cooler which I can see probably does jack if you are really giving the car death.. GTS4 cooler.. Is it an air cooler or water cooler?? I wasn't clear on that.. Finally get a relocation kit and fit a regular oil cooler.. I presume a 19 row regular type rad cooler would be fine for a start?? I don't intend doing heavy track use at all.. just a road toy if that helps! I was also planning on removing some of the other junk under the inlet plenum while I am at it to tidye tings up a bit.. I hear the Idle valve can be removed and then it's a cse of joining some pipes and blanking others.. By the way T04GTR.. What is the car in your avatar?? I can't make up my mind!? looks like a beast anyway.. Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4472440 Share on other sites More sharing options...
T04GTR Posted March 12, 2009 Share Posted March 12, 2009 the gts4 one is just a mounting plate. puts the filter in a easer to reach spot. no cooler there. a 25 row at a min. make sure you leave the rb30 relief valve in the block.. its a widebody dr30 Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4473359 Share on other sites More sharing options...
leeroy_25 Posted March 13, 2009 Author Share Posted March 13, 2009 DR30?? I am guessing that is a very early liner? Anyway. When you say the relief valve in the block I oresume you mean the bit that looks like a ball bearing? I wouldn't have enven considered removing it! So basically it's a sandiwch plate of some sort and relocation kit or cooler kit.. 19 row not worth bothering with?? Only ask as they seem to be very common and easy to obtain! Thank you Lee Link to comment https://www.sau.com.au/forums/topic/260414-rb26-stock-water-cooled-oil-coller-on-rb30/#findComment-4476863 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now