Jump to content
SAU Community

Recommended Posts

HKS in/ex camshafts 256 8.7 lift

these are in good condition, have been in car for 20,000kms

they came out of my R33 GTR so im not sure wot other gtr they mite go into

looking for $400 for the pair

would prefer pick up as they are heavy but can arrange postage at buyers expense

HKS 0.7bar adjustable actuators

Also in good condition with 20,000kms use also

these actuators came of a set of HKS 2530's for gtr's

looking for $200 plus postage

Standard r33 GTR exhaust manifolds

items are in good condition

looking for $120 for both plus postage

Standard r33 GTR coil packs

these where still workin fine at 300kw 1.1bar boost, with no sign of ignition breakdown

came out of a 95 GTR

looking for $60 plus postage

Bride Style seats

these came out of my brothers 200sx

have been retrimmed in black suede

items are in excellent condition apart from one tiny split in the side bolster of the drivers seat

this can be easily fixed

seats come with s14 rails

items are around 4 months old but havnt been in the car for about a month now

looking for $400 pick up only

all items are located in Wollongong NSW

if you have any further questions please feel free to pm me

post-22977-1236836533_thumb.jpg

post-22977-1236836596_thumb.jpg

post-22977-1236836652_thumb.jpg

post-22977-1236836695_thumb.jpg

post-22977-1236836755_thumb.jpg

post-22977-1236836819_thumb.jpg

post-22977-1236836885_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260804-gtr-parts/
Share on other sites

can you please check how much it would be to send the cams to perth, WA

yeh i can do that, just send me your post code and i can get you an estimate

Actuators sold pending payment

Link to comment
https://www.sau.com.au/forums/topic/260804-gtr-parts/#findComment-4474375
Share on other sites

cams sold pending payment

also for sale is a Torque split controller i bought of ebay. item is brand new with everything required for installation including instruction manual. people have had very good experiences with these units

im after $160 which is what i paid for it

post-22977-1237786623_thumb.jpg

Edited by UWISSH!
Link to comment
https://www.sau.com.au/forums/topic/260804-gtr-parts/#findComment-4493716
Share on other sites

also up for sale now is a standard r33 GTR v-spec computer with a HKS F-con V ecu wired into it.

this came with my car wen it arrived from japan

the ecu is a piggy back unit that controlls fuel and ignition timming and does not run air flow meters.

comes with all wiring minus the map sensors.

looking for $250 for everything

post-22977-1238396921_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/260804-gtr-parts/#findComment-4507218
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...