Jump to content
SAU Community

Recommended Posts

This is just an expression of interest at the moment. I have an opportunity to get myself into a very clean M3 that I have loved and eyed of for years.

My Veilside GTR has just been in the workshop for 5 weeks and have spent $11k at Creatd Motorsports on the following items-

Fully reconditioned Head with New Steel Cometic Head gasket.

Head Studs.

Injectors.

New Garret 2860-7 Turbos.

Apexi Power FC.

Front Dump Pipes.

Trust Greddy Cam Gears.

HD Creatd Spec Clutch.

DBA Slotted Brake Rotors Front & Rear.

Full Diff & Gearbox service.

Gizzmo Boost Controller.

Brand New ISC Radiator being fitted ATM.

Car has 122,000kms, Brembo Brakes, Momo Steering Wheel,Tinted Windows,Bosch Fuel Pump and is in AMAZING CONDITION. Car has 2 tunes with 275awkw on 18psi and 325awkw on 21psi.

This Veilside Evolution R32 GTR is the only 1 in Australia and is a collectors item, hence this is only an EOI at the moment as I am only willing to sell at the right price and while this M3 is still available.

PLEASE SERIOUS BUYERS ONLY!!!!

PRICE-$29,990

CONTACT JAMIE ON 0401-004-999 OR PM.

post-8487-1237110501_thumb.jpg

post-8487-1237111218_thumb.jpg

post-8487-1237111237_thumb.jpg

post-8487-1237111263_thumb.jpg

  • 4 weeks later...

Had a Guy from Sydney looking at past few weeks, but sale fell through!! Its worth the plane fare and truck back I can assure you!!

I have put it up For Sale on Carsales for $32K as M3 Sold but actually need to sell for business reasons now!!

So Car is now For Sale on here only at $29,999!

Just to let you know, I have now raised the price to $34,950 on carsales as I am now not so desperate to sell and will only sell at a price or trade with a car that I am happy with. Still taking offers and trades but this is the new bench mark.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...