Jump to content
SAU Community

Recommended Posts

Hey guys,

I was thinkin of gettin these tailight overlays for the v35 from bluetbatmobile in the states..

post-11043-1237117367_thumb.jpg

But I'm concerned about road laws regarding taillights etc in nsw.. I plan to get cutouts for the lights, indicators, reverse lights, and reflectors so that theyre still clear, jus the rest of the taillight smoked.. and the leds.. I don't wanna get defected or have insurance turn down a claim cause of these.. My understanding though is that as long as the lights and reflectors are not covered you're in the clear? Does anybody know exactly?

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/
Share on other sites

Hate to break it to you mate, anything changed after certification is a defect.

Plain and simple.

The only thing, within reason, is the exhaust.

As for a cop defecting you, probably not, as for the insurance company.... probably not.

Realistically you could remove the film before it gets sent to the repairer.... and if the guy that hits you doesn't know any better - no biggie....

Of course, this would be insurance fraud - legally you're obligated to notify the insurer of any modifications to the vehicle.

In saying that, i attach some photos from my old Mitsubishi Mirage, i drove around with these tints for over 1 year - got defected once, and it still passed pink slip, twice.

post-59558-1237119715_thumb.jpg

post-59558-1237119737_thumb.jpg

post-59558-1237119758_thumb.jpg

post-59558-1237119972_thumb.jpg

Edited by g33k
Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479253
Share on other sites

yeh realistically i doubt that itll cause a problem.. n ok anything after certification is a defect.. im not so much concerned about that though.... that point aside would they be technically illlegal? I just want the comfort of knowing that if i get any shit for em I can argue they arent technically illegal... as you know law is a funny business .. maybe its time i read through the big book of traffic law again hehe :banana:

Edited by mjay
Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479302
Share on other sites

Hate to break it to you mate, anything changed after certification is a defect.

Plain and simple.

The only thing, within reason, is the exhaust.

incorrect.

these is nothing illegal about those lights, no light is affected or dimmed, it just darkens the surrounding areas.

if that were true, black surround altezza lights would be illegal, which is not the case.

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479330
Share on other sites

actually ANY modification to ANY car, from factory, is technically illegal without an engineers certificate.

there ARE some owner certifiable modifications, but i rekon this one isnt. but how many people tint their rear lights? my S13 did! people do this stuff all the time, if you mod your car eventually youll get caught or it will bite you in the ass. its a risk we all take!!

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479385
Share on other sites

actually ANY modification to ANY car, from factory, is technically illegal without an engineers certificate.

there ARE some owner certifiable modifications, but i rekon this one isnt. but how many people tint their rear lights? my S13 did! people do this stuff all the time, if you mod your car eventually youll get caught or it will bite you in the ass. its a risk we all take!!

go read the ADR's, there are some mod's that do not require engineers certification.

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479395
Share on other sites

Well, this should settle it.

I just called RTA inspection bay (the place that do certifications to let you back on the road after a defect) - in NSW. Not sure about the equiv in VIC Roads.

They advise that any modification that hinders the visibilty of any light, is considered a defect and will not pass.

I even asked if you change the down light on the license plate to a different colour.

It actually has to be white.

So sorry my friend, you're out of luck, yes its a defect. It's not illegal to do, but it is to drive on NSW roads as its defective, hence making it illegal.

I agree, some modifications are OK, without engineers cert, i.e. Tyres up or down an inch.

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479554
Share on other sites

Well, this should settle it.

I just called RTA inspection bay (the place that do certifications to let you back on the road after a defect) - in NSW. Not sure about the equiv in VIC Roads.

They advise that any modification that hinders the visibilty of any light, is considered a defect and will not pass.

I even asked if you change the down light on the license plate to a different colour.

It actually has to be white.

So sorry my friend, you're out of luck, yes its a defect. It's not illegal to do, but it is to drive on NSW roads as its defective, hence making it illegal.

I agree, some modifications are OK, without engineers cert, i.e. Tyres up or down an inch.

Fantastic so considering that the visibility of the lights are in fact not hindered in any way since only the surroundings are covered then these should be fine... Hmmm Except if i cover the LEDs they may argue back on that.. Might have to have cutouts for them too.. :D

Thanks for calling them up by the way :blink:

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4479866
Share on other sites

i have these on my tail lights and you can see them when you step on the brake pedal just as good as if they where not on

even with the lights on

ive had mine for about 8mths now had police behind me and had no probs they look better than the pink lens i have pics on here somewhere

think its under clear front bar lenses

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4480517
Share on other sites

Police may not stop you.. but the serious problem is that if the insurance company deny your claim, due to THEIR decision that the overlay hindered other people's view from behind, you are dead. Your word over theirs?

It is not likely u gonna go and conduct a 'scientific' test, in order to fight in the court?

tat's why i didnt buy it, even if i love to have it..

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4481148
Share on other sites

i have these on my tail lights and you can see them when you step on the brake pedal just as good as if they where not on

even with the lights on

ive had mine for about 8mths now had police behind me and had no probs they look better than the pink lens i have pics on here somewhere

think its under clear front bar lenses

Can you post a pic, cant find anything in search...

Police may not stop you.. but the serious problem is that if the insurance company deny your claim, due to THEIR decision that the overlay hindered other people's view from behind, you are dead. Your word over theirs?

It is not likely u gonna go and conduct a 'scientific' test, in order to fight in the court?

tat's why i didnt buy it, even if i love to have it..

Yeh that's exactly the concern I have, not the police but insurance, but if the law states that it's only illegal if the visibilty of the light is affected, then it's fair to say that with cutouts visibility is not affected... As we all know in law it's not what you say but how you say it..

Link to comment
https://www.sau.com.au/forums/topic/261264-overlays/#findComment-4481189
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Is anyone running these axles? R32, R33, R34 GTR front Axles. shafts itself rated 950hp. Suit all RB26 engines Croydon, Melbourne, Victoria Would be nice to pay half the cost of Driveshaft Shop Axles. I'm building an AWD S13 Coupe that is very low ride height (high cv angle) compared to stock R32. Has an RB30 with appx 600whp. Just looking for feedback. Thanks, Josh- https://www.instagram.com/feng_shui_garage/
    • Been a long time since r31 got some love, my brother dropped a shitbox ls1 crapadore in my lap to fix up.  Put a wiper motor in as the flooded one was no longer alive.  got windscreen wipers now. Time to clean respray and install back in the titanic  IMG_0505.mov
    • Nah its a server spammer thing  Although, now that I manually approve all the accounts I can probably loosen up some of the restrictions.  
    • Thread bump, again! Although, no bad news this time. Posting for the sake of possible root cause. Basically, I rebuilt it (mostly stock), installed Haltech + sensors, had it running fine on new ECU.  Still not really understanding why it cracked pistons last time. Got to tuners, and while checking timing, noticed +-10deg of timing scatter while revving. Changed CAS, and it was rock solid. While not definitive, can't imagine seeing 20+ psi with that amount of scatter would be a good thing. Also glad I found something.   Bit more of a run down; Carried out a stock rebuild, a set of stock pistons, out of a spare bottom end. Everything stock apart from head studs and oil restrictors. (so I can pretend I didn't let the Nissan out, ha.) Armed with the measuring gear and FSM, set about doing overhaul. Oil restrictors as per oil control thread for a RB25, stock oil pump, drifting. Head drain/vent from rear of head, to passenger side of sump above oil level. Two dash 10 vent lines from drivers side of sump (unused atm) Hi octane style cam cover breather kit Splash covers over last 2 cam caps. Both breather lines from cam covers to vented to atmosphere catch can, not plumbed back into sump (wanted to see what it was actually breathing). Got it run in (did about a 1000km) no to low boost scenario, As I had questions over old ECU setup. Installed haltech +sensors for flex Retune on E85 (finding CAS Issue along the way), made 300rwkw at 20psi, out of wastegate. Did a drift day the next day (yes, it was a big weekend!) and was checking catch can throughout the day, ZERO blowby. I mean nothing. Lines from cam covers are not even wet. Done a bunch of street driving, spirited and catch can is still dry. Early days I guess, but pretty happy so far. Also now run 10w60, up from the 10w40 that I used to run. Oil pressure is significantly better, especially when hot (as you would expect)      
×
×
  • Create New...