Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Dodgey carnt you are :D So did I read correctly that the 180 is up and running? When are you coming down for a visit?

im not dodgy, im just saying its an option to get a dodgy but tell the buyer its dodgy :/

as apposed to leading them to believe its legit

and yes 180 is running :D

timing is out and she backfires and gurgles like a champion

going in for a tune/set up timing dyno run either late this week/early next week - once the motor is run in :D

Yeah bin back a week. We had a new Site Engineer start last week on Monday and he quit today. Apparently he has wanted to get out of the industry for awhile and he's looking for a new path to follow. Seriously WTF are you thinking when you go to the interview for the job then. Such a dog act. We are down so many staff it's not funny.

That sux aye. Give John a Job :D

Skylines wrecked skyline resale. And p plate laws.

Who buys a skyline for resale though? Especially a dirty 32 GTS-T :/

I know you love your camber but I need grip damit :D

I don't understand... Camber is better for grip except when going straight, which is when you least need it.

...Unless of course you're drag racing. Which is ghey :D

Stealing my lines....sheesh

Mangs.

You love it

they dont even look at mods, if your horn works and you have no split CV boots and decent tyres you pass

That was what I thought too

im not dodgy, im just saying its an option to get a dodgy but tell the buyer its dodgy :D

as apposed to leading them to believe its legit

You should have seen the state my XF was in when it passed RWC.

My rule: Always assume a RWC is dodgy.

and yes 180 is running :D

timing is out and she backfires and gurgles like a champion

How far out? Don't want to damage that nice new diesel. I has a timing light... somewhere...

going in for a tune/set up timing dyno run either late this week/early next week - once the motor is run in :D

One day in the hills - run in done. Watch for speed cameras :(:/

you are such a lazy little fluffy, when i sold the R32 i went to a legit place and it passed easily, they dont even look at mods, if your horn works and you have no split CV boots and decent tyres you pass

And lights! Haha. Yea they're lazy and probably just do the obvious.

im not dodgy, im just saying its an option to get a dodgy but tell the buyer its dodgy :D

as apposed to leading them to believe its legit

and yes 180 is running :/

timing is out and she backfires and gurgles like a champion

going in for a tune/set up timing dyno run either late this week/early next week - once the motor is run in :D

Sounds good! Dinner date this Thursday night?

I don't understand... Camber is better for grip except when going straight, which is when you least need it.

...Unless of course you're drag racing. Which is ghey :D

This is true . . . And I am planning on getting my lazy ass to tha track one of these dayz

im not dodgy, im just saying its an option to get a dodgy but tell the buyer its dodgy :D

as apposed to leading them to believe its legit

and yes 180 is running ;)

timing is out and she backfires and gurgles like a champion

going in for a tune/set up timing dyno run either late this week/early next week - once the motor is run in :)

Noice. What's done to the motor? Did you rebuild it? I thought you just bought a second hand one?

That sux aye. Give John a Job :D

I would but I refuse to recommend anyone for a job. That last guy was recommended to us by one of the Project Engineers and it makes him look like a dick when that guy quits lol.

Who buys a skyline for resale though? Especially a dirty 32 GTS-T :D

This is true.

I don't understand... Camber is better for grip except when going straight, which is when you least need it.

...Unless of course you're drag racing. Which is ghey :(

:/

Give me one too. I need a job change.

I do too, but this job pays too well

This is true . . . And I am planning on getting my lazy ass to tha track one of these dayz

Good stuff :D

I would but I refuse to recommend anyone for a job. That last guy was recommended to us by one of the Project Engineers and it makes him look like a dick when that guy quits lol.

LOL yeah. That is true.

Noice. What's done to the motor? Did you rebuild it? I thought you just bought a second hand one?

rebuilt motor mang 0km :D

well now 283km on it hahaha

how are you running it in sexy?

so far just have been taking the back streets everywehre - trying to vary speed / load - havnt taken her past 3500rpm

going to do an oil change tomorrow and then head up the mountains to finish off the last 250km or so of her run in, then get her on the dyno to sort out all the shittttttt

so far just have been taking the back streets everywehre - trying to vary speed / load - havnt taken her past 3500rpm

going to do an oil change tomorrow and then head up the mountains to finish off the last 250km or so of her run in, then get her on the dyno to sort out all the shittttttt

Do a skid :D

so far just have been taking the back streets everywehre - trying to vary speed / load - havnt taken her past 3500rpm

going to do an oil change tomorrow and then head up the mountains to finish off the last 250km or so of her run in, then get her on the dyno to sort out all the shittttttt

Start giving it some more revs, you don't want to baby it too much or you'll have a soft motor.

I don't mean redline, but maybe 5000rpm (whats an SR Rev to?).

You need to let the rings bed in over a large range of both load and RPM

Start giving it some more revs, you don't want to baby it too much or you'll have a soft motor.

I don't mean redline, but maybe 5000rpm (whats an SR Rev to?).

You need to let the rings bed in over a large range of both load and RPM

SR redline is 7500, alright ill start a little more tehehe

ps martin i think im a real contender to challenge your epic dose :ermm: - she doses nicely, especially considering the boost is set on 4psi

Dyno run in FTW, the run in on Annas car took an hour and cost like $70...WIN

Now just have to finish the tune :S

Hills run in FTW. Although with the speeding ticket, it actually cost me more than that :ermm:

Next time maybe I'll go the dyno option :D

ps martin i think im a real contender to challenge your epic dose :P - she doses nicely, especially considering the boost is set on 4psi

I approve <3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...