Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Also can anyone tell me what the RB30det wastegate actuator pressure is?

there is no rb30det from the factory...im assuming you mean rb30et as found in the VL if so it is 7psi

M3 ballerising > ghetto budget 180sx ballerising

his front fender costs more than your car.

there is no rb30det from the factory...im assuming you mean rb30et as found in the VL if so it is 7psi

Oops, yep that's the one. Thanks for that.

So running stock boost with a boost tee or something similar you are getting more lag or have you increased boost? How much laggier than stock is it?

I'm running 10psi, but yeah, even if I were to set it to say 7psi, it's laggier than using the stock solenoid.

Not a huge deal to me, I'm just curious, it's always been like that since I bought it and I've swapped it back to the stock solenoid twice, just for shits and giggles and to experiment and learn - I was a complete mechanical noob when I bought it but am pretty happy with where I'm at now.

Lost $600 at casino so I'm drowning my sorrows in beer and pizza

Did you look behind the fridge? That's the first place I look when I lose something.

Lost $600 at casino so I'm drowning my sorrows in beer and pizza

FFFFUUUU dude you coulda had your dick sucked at least once a day for the rest of the year by some milf at Ipswich centrelink for that.

FFFFUUUU dude you coulda had your dick sucked at least once a day for the rest of the year by some milf at Ipswich centrelink for that.

That implies there's ANYONE-ILF at Ipswich.

There is not.

Edited by mosquitocoils
FFFFUUUU dude you coulda had your dick sucked at least once a day for the rest of the year by some milf at Ipswich centrelink for that.

Yeah but the Ipswich hookers have too many teeth.

post-42920-1263625841_thumb.jpg

Munchies. Heres some photos of a similiar car.

http://www.cardomain.com/ride/704800

Wiki Quote

A total of 1,007 Panteras reached the United States that first year. Unfortunately, these cars were poorly built, and several Panteras broke down during testing on Ford's own test track. Early crash testing at UCLA showed that safety cage engineering was not very well understood in the 1970s. Rust-proofing was minimal on these early cars, and the quality of fit and finish was poor, with large amounts of lead being used to cover body panel flaws. Notably, Elvis Presley once fired a gun at his Pantera after it wouldn't start.

So... its a shitbox thats worth 70k today.

Lost $600 at casino so I'm drowning my sorrows in beer and pizza

cant win everyday Colin, im sure you will have a big night again soon with lots of monies :P

btw just curious, do you get taxed on money you make at the casino? like after they transfer it to you bank account. i find it ridculous that Commonwealth tell me they have very good interest rates and yet i earn about 37 dollars after having 10 grand saved in the account, and they even bloody deduct 16 dollars from that for tax, thats nearly half of it, i thought i could earn good income from savings but apparently the ATO doesnt think so.

Truckie sunburn sucks :D

And I have decided that the Gold Coast is made entirely from aids.

However I now have a new AFM :P so Martin, if you want me to drop yours in at Petrie tomorrow afternoon, text me your address and I'll drop it in on my way back from Donnybrook. Not sure if I'll make it on Thursday yet.

cant win everyday Colin, im sure you will have a big night again soon with lots of monies :P

btw just curious, do you get taxed on money you make at the casino? like after they transfer it to you bank account. i find it ridculous that Commonwealth tell me they have very good interest rates and yet i earn about 37 dollars after having 10 grand saved in the account, and they even bloody deduct 16 dollars from that for tax, thats nearly half of it, i thought i could earn good income from savings but apparently the ATO doesnt think so.

nah no tax on gambling in Australia

Pop quiz hot shots:

Stock R32 tyre profile/size?

Please? :P

gtr or GTSt? povo pack 15" hubs or 16" alloys or V-Spec II 17"?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...