Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Mine are good compared to driving with parkers on. That's about it lol.

niggah prease. I could see just fine with your lights on, and my lights OFF.

Don't expect to hear from him till monday night

Yeah I know, but was leaving it there for him to find. Turns out there's no such thing as a filter and ERD Dan thought I was on drugs. Quick phone call later he thinks my abs has raped my 4WD. Need to check sensors.

300HP out of the 20 should be pretty easy. Will only stop my nightmares if I don't ever have to do any work on the Z32.

Suggestions for reaching power target? I did so much research on VGs that now I don't know what to do with my RB.

NO work on it? What if it needs a bangin' stereo? :(

Who's Michelle?

Someone Tristan and I have both worked with

What toys?

These squeaky toys :P:D

SNC01214.jpg

yo

i got rid of my original lights (inc bulbs.) when i bought the blue ones

the bulbs in the original ones were those bluey ones they sell at repco for stupid expensive prices (for what they are)

my new bulbs are 100w ones (stock is 60w) - they are sexy, overnight parts from hongkong lol

@p.s. - yeh sure

@p.p.s. - yeeh had to dog - needed to pick up copper nut, and that involved a trip to manly lol

Think mine were hungee wottas too from memory. Probably using the same (or close to) what I used to have.

sweet :rofl:

what was Colin doing at Manly? :P

Edited by Isola

soooo......

Avatar is a complete piece of boring ass shit. Only good thing about it was getting to see that silly mole Michelle Rodriguez die again. Predictable rehashed phone in hack of a movie.

How do I go about getting back the 2hs 41mins of my life? Does anyone have a flux capacitor?

euro disney epic fail

waste of $140 in entry fees. in terms of rides, movie world or dreamworld rate higher

anyways, it's 1:30 am, and i gots to be up at 5am for our flight to new york. shall have a look for a mets hat once there.

will have net at the hotel in ny, so shall annoy you farkers some more

peace out

soooo......

Avatar is a complete piece of boring ass shit. Only good thing about it was getting to see that silly mole Michelle Rodriguez die again. Predictable rehashed phone in hack of a movie.

How do I go about getting back the 2hs 41mins of my life? Does anyone have a flux capacitor?

So glad I refused to ever watch a 3D movie about blue fairies, I'm going to use that 2h:41 and put it to good use....drinking

@ Andy:

What was the name of that RB management system that you were raving about a while ago that allows you to run without AFMs? Could I use it on my 20? And will it handle what I just said to Colin & Martin?

Adaptronic, though they are better for 4cyl applications as the e420c only has enough drivers to run a 4cyl in sequential spark. they have a e1280s now but i think it is around the same price as a vipec ect, the main advantage of a e420c was the pirce. it you are happy to run wasterd spark though the e420c is still a really really good computer, my old r33 is running happily on one

shall have a look for a mets hat once there.

Thanks :(

So glad I refused to ever watch a 3D movie about blue fairies, I'm going to use that 2h:41 and put it to good use....drinking

Yeah, I would never have watched it if the GF hadn't. I got bored a few times and went off to make coffee and things, so it probably doesn't owe me the full 2:41, but pretty close :)

Adaptronic, though they are better for 4cyl applications as the e420c only has enough drivers to run a 4cyl in sequential spark. they have a e1280s now but i think it is around the same price as a vipec ect, the main advantage of a e420c was the pirce. it you are happy to run wasterd spark though the e420c is still a really really good computer, my old r33 is running happily on one

Thanks Andy. Don't know why I thought it was an RB one. I'll keep on the hunt :)

Thanks :(

Yeah, I would never have watched it if the GF hadn't. I got bored a few times and went off to make coffee and things, so it probably doesn't owe me the full 2:41, but pretty close :)

Thanks Andy. Don't know why I thought it was an RB one. I'll keep on the hunt :)

vipec ftw

Cheers - I'll read up on them :)

btw - does anyone know how much mines ECUs go for for the 32? I got a dude wanting me to make him an offer on his, and I have NFI how much to say...

0$ they are for jap fuel and are really only useful to get rid of the speed limiter

Is that really the only benefit from it? What if it's mapped for Aus fuel?

you cant remap them, the eprom is covered in about 3 inches of epoxy so it cant be swapped out, the benefit is that on jap fuel they give you slightly better fuel and ignition maps and move the rev limiter and speed cut and the richen and retard part of the standatd ecu. But in Aus all it does is make the car run lean.

you cant remap them, the eprom is covered in about 3 inches of epoxy so it cant be swapped out, the benefit is that on jap fuel they give you slightly better fuel and ignition maps and move the rev limiter and speed cut and the richen and retard part of the standatd ecu. But in Aus all it does is make the car run lean.

ok cool, thanks again :)

I'm reading up on Vipecs, but it's making my brain hurt. So much info!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...