Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Finally some clear weather, so got the skyline out instead of the vw.

Driving the skyline in the wet is a major pain in the ass, as the demisters are rubbish and there is no air con, so usually have to drive with the window open, getting rained on...

And that's winthout mentioning the $80 a pop, plastic rear, barely can be called, tyres

Edited by PWND

My windscreen wiper has an issue where it sometimes scrapes the windscreen, quite annoying when you're sitting in traffic, you're ipod is dead, no good cds in the car and all you can hear is metal scraping glass.

My drivers side window also doesn't go up which is awesome for surprise storms.

Don't get me started about driving in the rain lol. The 31 has no heater or A/C and 1 window is never enough to stop the windscreen from fogging up so I end up with all the windows open. My lights are shithouse normally add rain into the mix and I can see about a metre infront of the car for everything else I have to use the force. Can't see out of the back window because of shit tint left over. The wipers are f**ked and seem to readjust whenever they please so one minute they will be fine next they won't make it over to the drivers side or they overshoot it and go off the windscreen entirely.

Certainly makes driving in the rain an adventure...

My 31 is just as pleasant to drive in the rain as it is in the dry

My 32 is good too. Just not when I have to cross epic rivers. The air con demists the rear window, so it doesn't matter that the rear demister doesn't work :banana:

Lol, what an evening. Was feeling energetic this afternoon and decided to tape up the coil packs on the 33, it had a flat battery as well so I went and picked up some jumper cables from a mate and jump started the car. Went out for a drive up to the servo in warner/bray park to pump tyres up. Car just started after putting some petrol in, gave it a bit of a boot to see how the coil packs went now that we'd fixed them up, was all sunshine and roses. Until the car started hunting.

Someone forgot to tighten a hose clamp up.

Had no flat head screwdriver so we called home and got someone to bring my car out, got the car and fixed up the hose clamp. Now my bonnet doesn't open so we were trying to flag down a car. A black 32 drove past us, kept going, a multitude of other cars as well as a white stagea who did a skid around the roundabout and then got chased by an undercover car. So thanks to those two drivers for pulling over! lol. In the end a hot little p plater pulled over and we got it all going :banana:

In the end a hot little p plater pulled over

*Stamp* APPROVED

Got this link in a email from Dad this morning lol. As good as the learn to speak Jap chick for sure.

*Stamp* APPROVED

learn to speak jap chick has nudes thus = better

I could only find shit pics that may or may not be her. I fail at internets. I demand that you share!

Question of the day - if you could swap your car for anything within reason (say 20k+ the value of your current vehicle) what would it be?

Mine? A very clean 32 GTR or 34 GTR.

Question of the day - if you could swap your car for anything within reason (say 20k+ the value of your current vehicle) what would it be?

My car with +20k spent on engine mods

Question of the day - if you could swap your car for anything within reason (say 20k+ the value of your current vehicle) what would it be?

In order of preference:

240Z fully restored + turbo L28 conversion

32GTR with a lot of work done

350Z + turbo conversion

Z32 2+0 twin turbo targa top

S2000

Question of the day - if you could swap your car for anything within reason (say 20k+ the value of your current vehicle) what would it be?

Mine? A very clean 32 GTR or 34 GTR.

Bongo van

In order of preference:

240Z fully restored + turbo L28 conversion

32GTR with a lot of work done

350Z + turbo conversion

Z32 2+0 twin turbo targa top

S2000

you beat me to it John

Mine is 240z, with either a rb26 or similar.

Currently in the market for a reasonable 240z shell :banana:

im actually the same as Martin, I would like another 20k to sink into mine for brakes, new suspension, track rubber, carbon bits and maybe some bigger turbos :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Perfect, I'll get to it this winter then at the same time as I weld on my anti squat kit. 
    • Alright so my 32 only has one temperature no matter what degree you set it to. I’ve tried disconnecting the servo motor arm and moving it either direction and got no change. I’ve fixed the leak in my AC and re charged it and with it on and clutch engaged it still blows hot even though the low pressure pipe going to the firewall is ice cold. Both heater core hoses are hot while running as well. Diagnostic code showed 24 for intake air temperature sensor. Anybody got any ideas?
    • I said Garrett style. Not Garrett genuine. And something in the G30 550 range is what you want. Not those pokey little old fashioned T28 sized things. The intake ports in the head are small. There is little benefit in fattening up the runners and leaving ths actual ports small. Just run what you've got. And on the subject of Nistune vs Haltech etc..... You know you can control the transmission with decent standalone ECUs these days, right? No need to keep any of that old Nissan bullshit. Don't get me wrong - I use Nistune on my Neo. But it is a DET, so the number of bodges and workarounds I had to do to make it work in a chassis without ABS, TCS, etc, is quite small compared to the herniated arsehole you will have trying to make it work on a motor that doesn't have some of the things that the turbo ECU wants to see. Just easier to bite the bullet and go aftermarket outright.      
    • Hmm. Only when the f**king thing is actually working. Still can't find the leak. And that's with dye being put in the last 3 times!
×
×
  • Create New...