Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

Nice stuff Dan

Evening all!

Anyone care to help, tell me about subframe bushes? I have clunks that have been there since I bought the car, I'm narrowing it down to the tailshaft/diff area, or possibly subframe bushes, based on what I've read.

How many bushes are there? Where are they, what is required to change them?

the bushes that hold the subframe to the body? or the bushes that hold the various suspension arms/diff onto the subframe?

could also be the tie rods or rack ends of the hicas setup. If its the subframe bushes themselves you'll next an oxy and a hacksaw

Ok, well I'll start with the easiest options first I guess.

Would the bushes where the arms etc join the subframe be the easiest place to start out of those options?

get under the back with a long screw driver or pry bar and try see what moves around too much, thats the best way to start looking, otherwise you just start throwing money away on things that don't need doing yet.

Photo1091.jpg

the end result of my work, its running R33 turbo calipers on the front now too.

Morning Mangs,

Boring weekend was boring. Wanted to wash the car but it wouldn't stop f**king raining. Stupid weather.

End.

Morning Mangs,

Is it Christmas Newtonmas yet? No, f*ck. Two weeks of work left :(

Fuck our country: http://www.theaustralian.com.au/australian-it/r18-adult-rating-for-pc-games-rejected/story-e6frgakx-1225969108337

And fuck the America:

get under the back with a long screw driver or pry bar and try see what moves around too much

That's what she said.

otherwise you just start throwing money away on things that don't need doing yet.

That's what she said.

the end result of my work, its running R33 turbo calipers on the front now too.

That's what she said.

That looks the same height all around

That's what she said.

Boring weekend was boring. Wanted to wash the car but it wouldn't stop f**king raining. Stupid weather.

End.

Solution to being bored: GT5.

End.

Mate doesn't have a PS3 and Lee would throw a shitfit if I tried to take the PS3 away lol. Have to wait until my mate sees the light and decides he needs a PS3

Mate doesn't have a PS3 and Lee would throw a shitfit if I tried to take the PS3 away lol. Have to wait until my mate sees the light and decides he needs a PS3

I'll trade you a PS3 for your sister. I'll even throw in a copy of GT5 ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Messing around with. Twin kit for. Rb30/26  
    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
×
×
  • Create New...