Jump to content
SAU Community

Inner West Crew Whoretown (toowong/st Lucia/kenmore/indooroopilly And Sometimes Sunnybank?)


Recommended Posts

I've run out of crayon's though.

Nikko pen will be acceptable

Jason you keen for German club?

Suspended in my work = sacked lol.

What time?

sacked,suspended, given the arse and getting a DCM all the same thing.

yer suspended at my work normally means escorted off the premises, they know we have sticky fingers and will take anything even if its bolted down

Although the word mistake at my work can range a fair bit, anywhere from a talk from the manager to a court case for manslaughter

I have a lot of colour pencils. The project manager saw me marking up scaffold drawings in coloured pencil and he was like

PM: Are you marking up drawings in coloured pencils?

Me: Hell yes

PM: You do your planning in coloured pencils?

Me: Hell yes

PM: f**k yeah I love coloured pencils.

I have a lot of colour pencils. The project manager saw me marking up scaffold drawings in coloured pencil and he was like

PM: Are you marking up drawings in coloured pencils?

Me: Hell yes

PM: You do your planning in coloured pencils?

Me: Hell yes

PM: f**k yeah I love coloured pencils.

Lol

and, anybody got an angle grinder I can use, or that can do a slight trim on couple of choice metal bits on my car.

cage is being a real pain in the ass to install

one long pain in the ass

jason i think what you are looking for is called "bailey channel" Im not 100% on this but pretty sure its near enough for someone to know what your talking about

I has angle grinders

you coming to german club tonight, and if so, are you going past your place first?

I just have one support bit where the sunroof used to sit fouling against the cage, so just need to trim it by about 5mm

Had a morning tea this morning to raise funds for the qld flood appeal. Everything that got donated Brookfield is going to match. So far from the head office sites in Brisbane we've raised nearly 13 grand. Solid effort by everyone :cheers:

you coming to german club tonight, and if so, are you going past your place first?

I just have one support bit where the sunroof used to sit fouling against the cage, so just need to trim it by about 5mm

Or, I can swing past your place at some point in the week and you can have a crack, as I haven't used an angle grinder before....

Or, I can swing past your place at some point in the week and you can have a crack, as I haven't used an angle grinder before....

KEEP BODY PARTS AWAY FROM THE SPINNY BIT thumbsup.gif

you coming to german club tonight, and if so, are you going past your place first?

I just have one support bit where the sunroof used to sit fouling against the cage, so just need to trim it by about 5mm

I am, and I am home now. Can bring it if you want. Angle grinder on the train will be baller. Just let me know coz I don't want to bring it if you don't want it.

Or, I can swing past your place at some point in the week and you can have a crack, as I haven't used an angle grinder before....

If you like, although I can take no responsibility for unwanted metal damage...

Had a morning tea this morning to raise funds for the qld flood appeal. Everything that got donated Brookfield is going to match. So far from the head office sites in Brisbane we've raised nearly 13 grand. Solid effort by everyone :cheers:

Awesome stuff. Powerlink is also matching donations dollar for dollar. Was just over 20g this morning.

also keep genitals away from the spinning bit too

Since when are genitals not body parts?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...