Jump to content
SAU Community

Recommended Posts

Whole car, almost - missing wheels so BYO, and some interior, 80000 kms on motor, aftermarket suspension, new twin plate clutch, Blitz intercooler, is on write off register,and would be too hard to repair, so selling as is, or will part out, whole offers at $8000 ONO, or 1/2 cut at $6000 with no panels or susp or brakes with the 1/2.

call 0403 071 294 or PM here. Located Westside Brisbane.

It has been under a house for 18 months, and this is first time posted

pics are here,,

http://img27.imageshack.us/gal.php?g=dsc01037d.jpg

Looks like not much interest in whole car, so it starts to get cut up, will separate for parts.

1/2 cut with motor/box/ecu/loom/dash/ $6000

motor done 76000 kms,

LHS side panels all good, rear bar/boot and taillights too,

Brake package with hubs avail. also front struts/LCA's arms etc,

diff/cradle/arms/struts ready to be unbolted, byo tools, we lift -you undo -

pm or ring 0403 071 294

Yep I will post into parts section, sorry was in whole, it still is until this Satday!

I have a GTR shell if anyone wants to put the 2 together!

Now that sounds like a plan.

I am ready to cut it in half, so if anyone is thinking about combining this straight shell with my bent shell's bit, let me know what you wnat or need, and you'll end up with a 76000kms R32 gtr that gets put back on the road.

A bit o' grease under the nails, and some skinned knuckles, and you've got a good one!

Car has now been cut up and selling parts.

Panels (some) front cut, rear end, intercooler and piping, doors, guards, bonnet, front &rear bars and reo bars, bootwith wing, tail and headlights,

Motor/box sold as package consider separating id offer is sufficient.

PM

for further details

Will shortly post into prts section.

Mods

please place this thread into Parts section as you wish

many thanks

  • 2 months later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...