Jump to content
SAU Community

Nissan R33 Skyline Series 2 Type M 1996 247kw

Deluxe
 Share

Recommended Posts

Deluxe Grand Master

Deluxe

Posted
Posted (edited)

Ok folks, here's the deal!!

My mate owned this car about 7 years ago, 3 years later he sold it to me, 3 years later again i sold it back to him, and he has had it for about a year or so now, BUT being a business man and running his own business, he hasn't had the time to drive it and has a company car. SO he has asked me to sell it for him(I have the car to sell), as i used to own it and know everything about it.

Ok the car is a 9/1996 model M Spec series 2, was imported waaaaay back in 1998 by the SVD president, and bought by my mate in 2002, bought by me in 2005 and bought back by my mate in 2008, So there's the history lesson!!

Over all the car is in great shape, apart from the usual blemishes like a crack or two on the front bar, there is also a dent on the rear pillar on the passenger side where a umbrella has fallen on it(will try and fix), and also the ariel wont go up. So there is the minor detail of the issues.

Below is the list of details of things on the car:

Performance:

Apexi Power FC(No Hand Controller)

Adelaide Turbo Services T3 Hi flow T4(Running 16psi)

Z32 Air Flow Meter

Walbro Fuel Pump

Nismo 550cc Injectors

Profec B Electronic Boost Controller

3inch Stainless Steel Exhaust

JunBL Muffler

R33 GTR Front Mount Intercooler

KnN Pod Filter

DBA Slotted Front Rotors(1yo)

Bendix Race Pads(All Round)

Extreme Clutch

Oil Catch Can

Suspension and Handling:

Cusco Front Strut Brace

Cusco Rear Strut Brace

Whiteline Springs

Bilstein Shocks

Whiteline Sway Bars

18x8.5F 18.9.5R Starcorp Wheels

235/40/18 Tyres all round(Great Condish)

Cosmedics:

GTR Front Bar(6 Months Old)

Side Skirts

Rear Pods

Stealth Wing

Tint

Alarm

Momo Gear Knob(Old School)

Sony Remote CD Player

Turbo Timer

Power:

247rwkw (Boostworx 2/7/09)

Price:

$15,500 Negotiable

Contact:

Darren 0412641522 or PM me! :D

This car has been well looked after for ALL of its life(168,XXXkms), early days it had seen "some" work done by Tilbrooks, but as of the last 5 years or so it has only been to see Shaun and Troy down at Boostworx for tunes and mods, servicing has been done by myself or my bro in law(Qual Mech). The sound of this thing under full throttle is amazing, and although both myself and my mate had plans for a squirt at Mallala(grip) it never happened, so it hasn't ever seen a track.

The price is higher as we are not in a hurry to sell, It is however negotiable, but if you offer something stupid you will be treated the same. Pictures are included of the couple cracks in front bar, and of the slight dent.

I have been thru a couple defect stations and have been let off, In the time i owned the car personally i never got any trouble from the cops, and yes it was driven as a daily, during day time AND night time as i work shift work! Also the engine bay looks very much standard apart from a pod!

Cheers

Darren

post-18883-1237784293_thumb.jpgpost-18883-1237784649_thumb.jpgpost-11604-1124726484.jpgpost-18883-1237784810_thumb.jpgpost-18883-1237784871_thumb.jpg

[

attachment=213374:DSC01970.JPG]post-18883-1237784987_thumb.jpgd55.bmppost-18883-1237785031_thumb.jpgpost-18883-1237785052_thumb.jpg

post-18883-1237784791_thumb.jpg

post-18883-1237784946_thumb.jpg

post-18883-1237785014_thumb.jpg

Edited by Deluxe
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
    • GTSBoy
      R33 persistent issues. P/steering and lag/misfire

      By GTSBoy · Posted

      What are we supposed to be seeing in the photo of the steering angle sensor? The outer housing doesn't turn, right? All the action is on the inside. The real test here is whether or not your car has had the steering put back together by a butcher. When the steering is centred (and we're not caring about the wheel too much here, we're talking about the front wheels, parallel, facing front) then you should have an absolutely even number of turns from centre to left lock and centre to right lock. If there is any difference at all then perhaps the thing has been put back together wrongly, either the steering wheel put on one spline (or more!) off, and the alignment bodged to straighteb the wheel, or the opposite where something silly was done underneath and the wheel put back on crooked to compensate. Nut there isn't actually much evidence that you have such a problem anyway. It is something you can easily measure and test for to find out though. My money is still on the HICAS CU not driving the PS solenoid with the proper PWM signal required to lighten the load at lower speed. If it were me, I would be putting either a multimeter or oscilloscope onto the solenoid terminals and taking it for a drive, looking for the voltage to change. The PWM signal is 0v, 12V, 0V, 12v with ...obviously...modulated pulse width. You should see that as an average voltage somewhere between 0V and 12V, and it should vary with speed. An handheld oscilloscope would be the better tool for this, because they are definitely good enough but there's no telling if any cheap shit multimeter that people have lying around are good enough. You can also directly interfere with the solenoid. If you wire up a little voltage divider with variable resistor on it, and hook the PS solenoid direct to 12V through that, you can manually adjust the voltage to the solenoid and you should be able to make it go ligheter and heavier. If you cannot, then the problem is either the solenoid itself dead, or your description of the steering being "tight" (which I have just been assuming you mean "heavy") could be that you have a mechanical problem in the steering and there is heaps of resistance to movement.
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      Little update  I have shimmed the solenoid on the rack today following Keep it Reets video on YouTube. However my steering is still tight. I have this showing on Nisscan, my steering angle sensor was the closest to 0 degrees (I could get it to 0 degrees by small little tweaks, but the angle was way off centre? I can't figure this out for the life of me. I get no faults through Nisscan. 
×
×
  • Create New...