Jump to content
SAU Community

Recommended Posts

Im interested in getting a vented bonnet, something similar to the Z-Tune bonnet for my 32GTR but i dunno where to get em....

...is there some sort of bodykit shop or something in Melb where you can buy them????

P.S: Would it be legal?

Link to comment
https://www.sau.com.au/forums/topic/262427-vented-bonnet-32r/
Share on other sites

check the roady/epa thread i believe there is discussion in there about its legality.

pretty sure you need an engineers cert.

from memory anything fibreglass on the exterior of your car is illegal because FG splinters and can impale... CF on the other hand i think bends more and shatters instead of splinters? cant remember. Most CF bonnets are FG with a thin CF layer on top

I stumbled on this as he's a member of the forums, but i dunno how legit he is though. Maybe someone else can give some info...

http://www.isc-warehouse.com/index.php?mai...a20e1e899bbb8d7

Damn they're expensive...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...