Jump to content
SAU Community

Garrett Gt40 Turbo & Walbro Hi-flow Intank Fuel Pump Gss341

Woodster3rd
 Share

Recommended Posts

Woodster3rd Explorer

Woodster3rd

Posted
Posted (edited)

Garrett GT4082 Turbo internal wastegate, T4 flange

Brand new in Box Genuine Walbro GSS341 fuel pump

Location: Gold Coast, QLD

Item Condition: Garrett - Used, still works fine. Walbro - bnib

Reason for Selling: Don't need them

Turbo is internally wastegated but am unsure what boost it runs at, is rated 350-575hp, no shaft play, suited for a 2.0-7.0L. Turbo is a journal bearing and oil cooled. 4" turbine Inlet, 3" turbine outlet, T4 Exhaust inlet flange, V-band exhaust outlet. $700ono

High Flow intank Walbro Fuel pump rated at 255lph comes with walbro filter and adapter, connector, 52mm rubber insulator, hose clamps and washers - everything you need for easy install into an intank setup. $200ono

Contact Details: PM or mobile 0423031381, pickup on Gold Coast

post-51463-1237876148_thumb.jpg

post-51463-1237876176_thumb.jpg

post-51463-1237876208_thumb.jpg

post-51463-1237876240_thumb.jpg

Edited by Woodster3rd
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...