Jump to content
SAU Community

Recommended Posts

  • Replies 335
  • Created
  • Last Reply

Top Posters In This Topic

Dyno Dynamics can run the car all they want, what is that going to prove...? It may or may not be within the limits of the software used.

Another car that got 339rwhp = 255rwkw on your dyno manages 111mph. On the dyno i use a 200rwkw gts-t will do the same TS.

Until we have a fixed form of measuring power that is used across the country, there is no point in quoting power figures.

Wolf plugins for Skylines is about 1 year old now and was basicly the first in the range. We have things like VLs etc on the market now and the list is growing fast. Sydneykid, please check your facts before posting as you are making a lot of false statements.

Originally posted by Emre

Dyno Dynamics can run the car all they want, what is that going to prove...? It may or may not be within the limits of the software used.

Another car that got 339rwhp = 255rwkw on your dyno manages 111mph. On the dyno i use a 200rwkw gts-t will do the same TS.  

Until we have a fixed form of measuring power that is used across the country, there is no point in quoting power figures.

Yes but you arnt taking into account how bad I am at drag racing :P On the strip I never can get it right, look at my 60' times :) I need someone to be sitting in the car coaching me what to be doing and when and how, or I could let someone like rev210 or steve-sst, who know what they are doing, drive the car.

Need me to drive?

no worries rob! :P

I've actually been in Robs car, it has the power. Rob is a little too kind in shifting gears, something he can get help with I'm sure.

Rob how about giving us the 660 and 1000ft times and speeds, this will hopefully show the issue you had with the power drop.

I've actually been in Robs car, it has the power.

Being a passanger in a car that's equipped with a Trust turbo like the TD06 may give you the impression that it's fast. Unless he was having a nap on the 1-2 change, a coffee on the 2-3 change and maybe a quickie on the 3-4 change, that 111mph is a good indicator of the power. :P

He didn't have one run and pack up, he had 5-6 runs, out of which the 111mph was the best. 13.88 is obviously is slow for the mph and can be improved on but i can't see anyone else improving on the mph by more than 1-2mph.

Incidentally, do you have a graph of your dyno run Rob...?

Originally posted by Emre

Dyno Dynamics can run the car all they want, what is that going to prove...? It may or may not be within the limits of the software used.

Another car that got 339rwhp = 255rwkw on your dyno manages 111mph. On the dyno i use a 200rwkw gts-t will do the same TS.  

Until we have a fixed form of measuring power that is used across the country, there is no point in quoting power figures.

ROFL.......so you seriously think a car with a TD06 is going to produce similar power to the stock RB25 turbo?

If you are experienced in drag racing, you would know that drivers can make a massive difference in times, as dozens of other things will too.

If dyno dynamics say the dyno is reading accurately, what better comparison is there for power figures (when using shootout mode)? seriously.

Originally posted by Emre

Being a passanger in a car that's equipped with a Trust turbo like the TD06 may give you the impression that it's fast........

but you are saying that its not? I think you are completely wrong. Trust have been producing these turbos for years and sold thousands of them cos they are only as good as the stocker, but make the car feel faster????

Dyno Dynamic are forcing tough new Dyno procedures so they would not like to hear you comments. A mates car runs 11.4@112mph with 307rwhp on my dyno so a driver can have a big effect on 1/4 performance. Trust products are outstanding and been around for a long time so these comments are pointless.We will get Robs car down the 1/4 fast soon!Rob and Pauls cars are well planned cars built at a low cost and they have every right to be proud of their effort so stop grizzling and do better your self.

Yes this is true and the good thing is they acted fast and i came up clean plus GTSt Vspecs car was tested 5 days ago and after the dyno tests were done.. The new software is going to clean up the market,DD own the new procedures and will take it away from any shop tampering with it.If you think you get a fudged power run please report it even if its from me.I pushed hard to get this thru its just a pitty we can't clean up other brand dynos but they are a minority anyway.Look for Shootout accredited DD dynos Australia wide from now on to be sure you get the facts and then you can compare your car to any car featured in any mag world wide tested this way.

ROFL.......so you seriously think a car with a TD06 is going to produce similar power to the stock RB25 turbo?

You are still comparing figures taken on different dynos. How do you know a GTS-T with a stock turbo gets 200rwkw on the dyno i use?

TD06-20G can support between 380-420hp at the engine depending on the trim. It is good to see that some can manage this just on 1 bar.

If you are experienced in drag racing, you would know that drivers can make a massive difference in times

No one is looking at the times. His best mph of 111 out of 5-6 runs is a good indication of power unless he was on a leisurely drive.

If dyno dynamics say the dyno is reading accurately, what better comparison is there for power figures (when using shootout mode)? seriously

Time will tell whether the 'shootout mode' is the new form of measuring power. From what i've seen so far, we are gonna get figures similar to the ones taken in US from their DynoJets.

but you are saying that its not? I think you are completely wrong. Trust have been producing these turbos for years and sold thousands of them cos they are only as good as the stocker, but make the car feel faster????

If you are running the TD06 only on 1 bar, it'd be marginally faster than a well set-up stock turbo; however it would feel quite faster than before because of the way it spools up.

Steve-SST,

If you think the TD06 is an outstanding turbo good for you dude. I haven't knocked Pauls's or Rob's cars and efforts, if it came across that way i apologise. I've only been commenting on the power figures quoted cause it seems to be a bit high and at every where i look lately.

EDIT: And don't you worry, as soon as i get of my P's i will start to modify my car as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...