Jump to content
SAU Community

Recommended Posts

33 gtr Nismo S-tune Suspension

condition: very good, no leak or anything

reason for selling: looking for some tein's

location: vic

price: 800 firm

pick up preffered

info: Nismo intoduce the S Tune Suspension kit. Lowers car up to 20mm, reduces body lean, pitch and dive. Provides neutral, balanced handling. Spring rate is 20% stiffer and damping force

Nismo offers a completely engineered system for your Nissan

its not height adjustable. but damper is adjustable

post-27999-1238228817_thumb.jpg

post-27999-1238228827_thumb.jpg

post-27999-1238228834_thumb.jpg

post-27999-1238228844_thumb.jpg

Edited by bokie
Link to comment
https://www.sau.com.au/forums/topic/263074-33-gtr-nismo-s-tune-suspension-800/
Share on other sites

Price?

Edit - Just saw you added it :blink:

Hi, Ben

Its Alex from Melb.sent the F-con gold ecu to GT Garage a few days ago. Hope it will get you the 300 kw+ . It is a petty we don't have HKS tunning garage down here in Melb.

By the way, Where is the Nismo suspension located??

0433 559972. I am still chasing a set of RB26 +20 forged pistons set and a good GTR33 crank. Anybody can help??

cheers

Alex

we should put up a time waster name list. so far i've got 1person agreeing to buying then saying they dont have money at the last minute. another agreeing to buying then just stop replying. and a few other just after asking for my bank details then just dont reply, untill i msg them back. and they ask for location and condition of the suspension, seriously people. read the add. it will TELL YOU ALOT.. hmmm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...