Jump to content
SAU Community

Recommended Posts

The following parts are for sale they are for and off an R32 GTR

1. Complete New EXEDY push type single plate clutch heavy-duty rated upto 300KW @ wheels. $500

2. 2nd hand good condition EXEDY (push type) single plate clutch heavy duty good for at least a year. $250 ono

3. Two standard turbos with dump pipes. $300

4. Two AFMs Air Flow Meters in good working condition (Tested). $300/pair

5. Standard Cam gears. $50/pair

6. Complete Rear Tail Lights excellent condition. $200/pair

7. Flywheel. $150 ono

8. HICAS computer. $100 ono

9. 4WD Computer. $100 ono

10. R32 GTR Intercooler works perfect. $250

All Parts are Located In Sydney.

Postage can be arranged at your own cost.

Link to comment
https://www.sau.com.au/forums/topic/263241-r32-gtr-parts-located-in-sydney/
Share on other sites

Complete engine Head in a very good condition the engine had low kms and the car was stock standard, and Yes it has everything including:

Rocket covers,

throttel body,

Plenum & Manifolds,

turbos (in perfect condition) with dump pipes,

Injectors with injector rail and wiring,

Cams and Cam gears

All in excellent working condition Ready to go on a block. $2000

Here are some pics of the clutches I also have HKS BOV for sale and a standard BOV complete with the pipes.

This is the New Clutch it has been modified so it's actually better than the standard and the standard is rated at 300KW @ the wheels, so this one will handle more than 300kw @ the wheels

post-57341-1238498687_thumb.jpg

post-57341-1238498714_thumb.jpg

post-57341-1238498731_thumb.jpg

I also have a Pair of 3inch Xtream Top filter (K&N) Air Pods to suit any car with alloy intake Pipes to Suit GTR afm's. Comes with the cleaning Kit.

High Flow Filter with Extreme Top

• Washable/Reusable

• 1,600,000km warranty from K&N

• Unleash the power within!

$300

post-57341-1238592449_thumb.jpg

The following parts are still for sale they are for and off an R32 GTR

I've discounted some Items

1. Complete RB26 Head in a very good condition the engine had low kms and the car was stock standard, and Yes it has everything including:

Rocket covers,

throttel body,

Plenum & Manifolds,

turbos (in perfect condition) with dump pipes,

Injectors with injector rail and wiring,

Cams and Cam gears

All in excellent working condition Ready to go on a block. $2000

2. Complete New EXEDY push type single plate clutch heavy-duty rated upto 300KW @ wheels. $500 ono

3. 2nd hand good condition EXEDY (push type) single plate clutch heavy duty good for at least over a year. $250 ono

4. One AFM Air Flow Meter in good working condition (Tested). $170

5. HKS bov with pipe and all hoses required for fitting $350

6. A Pair of 3inch Xtream Top filter (K&N) Air Pods to suit any car with alloy intake Pipes to Suit GTR afm's. Comes with the cleaning Kit. $300

7. Standard Cam gears. $50/pair

8. Complete Rear Tail Lights excellent condition. $200/pair

9. Flywheel. $100

10. HICAS computer. $80

11. 4WD Computer. $80

12. R32 GTR Intercooler works perfect. $250

All Parts are Located In Sydney.

Postage can be arranged at your own cost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...