Jump to content
SAU Community

Recommended Posts

R32 GTS-T 4 Door Skyline Manual – Blown Motor - WHITE

Hi Guys, I am gaining interest on selling my sky. Either parting out or selling as a whole. The car has had thousands spent, and been built up for drift.

Recently it has had an accident, rear left C pillar is dented, and door sill is bent in. The car drives completely straight and is only cosmetic.

Recently the motor has let go, either a blown bottom end or fried piston rings, its running very rough and blowing allot of smoke.

This car would suit someone with time and knowledge to replace the engine, all the supporting mods are there, an RB20 block wouldn’t cost you much its a mater of time and effort.

The engine made 210rwkw on the supporting mods listed below.

If I can sell as a whole I will, otherwise I will part out, at this stage I am gaining interest.

Car is rego and complied. No RWC, but I have all stock parts that can be included in the sale.

Price $8000.00

Price is negotiable in terms of what comes with the car, if i don’t get any interest I will part out.

Location: South Eastern Suburbs Melbourne

Modifications include:

Engine: Serviced reguarlly, not that it matters now, but everything is looked after, all the support mods are still there for anyone who buys this package.

· RB20DET (Blown...yet to confirm exactly)

· Rb25 GCG Highflow turbo (less then 15000km)

· GCG 16psi actuator

· Sard 650cc Injectors

· Sard Fuel Pressure Regulator

· Z32 AFM

· Custom Intake/cold air AAA Pod filter

· Cusco Catch can

· Adjustable cam gears

· Gates Timing belt

· Gready FMIC

· Splitfire coilpacks

· Turbotech boost controller

Gearbox/Driveline:

· Standard RB20 Box

· Brand new Redline fluid, less the 100km old

· Short shifter

· Nightworks Urathane Gearbox mount

· Welded Diff

Suspension/Brakes:

· Coilovers; Buddy Club front, and JIC rear

· Front Nismo strut brace

· CUSCO rear strut brace

· Alloy rear sub frame bushes

· Urathane upper control arm bushes (front)

· DBA 4000 slotted rotors Brand new less then 300km (front and rear)

· QFM A1RM 650 degree hi temp pads, (front and rear) less then 300km

· HICAS completely removed, lock bar and all solenoids and lines removed

Interior:

· Cusco full cage 6 point with harness bar, (currently just running half cage but rest will be included)

· Rear trims + seats removed but will be included

· Drift handbrake button

· Autogauge gauges: Water temp, oil temp, oil pressure, air/fuel and boost.

· Golf Ball shift knob

· Pioneer CD/MP3 headunit

· Pioneer 6x9 rear speakers

· Momo deep dish steering wheel (same dimensions as nardi deep corn)

Body:

· GTR Bonnet

· Top Secret Grill

· White

The car if sold complete will come with all stock and remaining spare parts. I bought this car stock and have nearly everything that has been repaced. Just off the top of my head this will include:

· Bonnet

· Suspension/spair disk rotors

· Stock wing

· Stock trims

· Stock engine parts inc, turbo, AFM, injectors, SMIC

· Airconditon lines/condsor/unit

In addition to the above, the car will also come with the following items not installed on the car.

· Grex Oil cooler and relocation kit

· BnM line locker

· R33 stock wheels x2

· Recaro sr3 recliner bucket seat (no rail)

· GTR Front bar, genuine N1, damaged but repairable

I am sure I have missed a few things, feel free to call my mobile or sms for any questions regarding sale of whole package. Please do not ring or msg about individual items as I am not spiting yet. I am happy for you to express your interest in the forum or via pm for individual parts, however be aware I rather sell this complete and get rid of it completely.

I have genuine reasons for sale. I am starting an apprenticeship and have no time or money to fix this car.

My loss is your gain

n571650285_1113715_1535.jpg

n571650285_1252416_7786.jpg

$8000.00 ONO we can discuss what comes with sale.

0400 200 997

I've got a Virgin RB20DE w/Free Auto for $500 that someone can whack in this car with all the turbo bolts ons.

Its out of the same type of car - R32 4 door. The High comp would make the RB20 a joy to drive off boost :D

PM Me for more info. Genuine 120k kms.

Theres a good chance the engines not blow it could be electrical, I will post up a compression test shortly, just waiting on the tester. I am honestly over it though, and still selling as is. You could be potentially geting a good buy here if the engines fine, I just want it gone.

Bump...still waiting on compression tester, but 85% sure the problem is ignition, ie cas or ignitor. If your interested feel free to do your own tests.

Also if someone buys the rolling shell I will 100% split.

PM with offers.

Rolling shell is negotable depending on what you want...suspension stock or coils, brakes stock or DBA4000/QFM all depends what you want.

I will ONLY split if someone wants a rolling shell.

Few questions people been asking...

Is it Rego?

Yes, reg expires in november.

Does it have gaundor mirrors?

Yes, GK tech ones.

Swaps?

I am oppen but really depends what it is, would rather cash.

Also on another note, I am flexible will lower the price if you dont want all the spares, or I can put some stock parts back on.

can u send me some more pics and pics of damage? where are u from? is it runing all smooth? what was/is wrong with it?

PM Sent, located in Malvern East, Melbounre.

Cheers

Comp tested!

Engine not blown, turbo not blown, spark and fuel...but suspect fuel pump or pressure...

Still for sale, but price is neg.

If I dont sell it will just get fixed slowley, I am about to start trade school so no money, my loss your gain, make an offer.

PMs replied...

open to offers need this gone asap, can sill with our without parts

It can be sold fixed or as is.

Edited by LRyder
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...