Jump to content
SAU Community

Recommended Posts

I assumed that the day would begin at 5pm (followed the link in this thread, it said 5pm then realized that was for drift)

The Mallala website is useless.

This only information I could find was this flyer:

http://www.mallala.com/startyourengines/PTD%20Brochure.pdf

Which must be about something else as it is $495 per day, but says that the session starts at 8:30am.

So i guess I will call them tomorrow to get all the details, does it start at 8:30 or 5? and why isn't that information readily available on their website?

you'd think you could click on the event you were interested in on the website and it would give you details, or at least that the details would be SOMEWHERE on the site.

Jeez it's late.

Edited by medman2damax
  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Hi All,

Just called mallala, spoke to Pete, asked for some info, he said the session tomorrow starts at 8:30 but he was not sure about cost. I asked him if the prices on the website for 2008 were unchanged (i.e. $100 + $25 for the CAMS license for the day) He said that was probably what it would be.

We both agreed the website was useless.

Clem is the guy with all the info but he won't be there until lunch time, but tomorrow definitely starts at 8:30 am and the cost will be approximately $125.

Will post more info if I end up speaking to Clem later on.

Hope to see some other skylines out there, I'd hate to be representing on my own :P

Since it's an 8:30 start how about BP west Tce at 7:15, head out at 7:30. It takes roughly an hour to get there. If anyone is keen to meet up PM me and we'll exchange details.

The Caltex on Port Wakefield road, Bolivar is a good place to meet, last stop to fill up and get food, etc.

Please don't put Caltex in your car, go across the road to BP. My R32GTR with caltex fuel and 4000rpm = knocking at 82. BP fuel and 7000rpm = knocking at 20.

Ryan

Hey all,

I was out there today (someone had to represent). Was pleasantly surprised to find a few of our brethren there. RBWARE was there and so was BANNED, Plus another R32 GTR (silver one, forgot the dude's name). There was also one other 33 on the track besides me, Charcoal one with black wheels.

Was good fun, Stock brakes did alright, after 15 mins of hard use they gave up though but there were one hour intervals between runs so they had plenty of time to cool off between runs. They were fine again at the beginning of the next round.

I was sorely dissapoitned in my cheap ass tires. Pirelli's or Toyo's next time.

There was a good mixture of cars, some old school (Datsun 1600 running an FJ turbo, Old escort, old corolla, datsun 240z) some newer (our skylines, evo 7, evo 9) some brand spankers (350z, focus turbo, civic type r, evo 10). There was one R34 GTR track car but that didn't go on at the same time.

My exhaust looked brand new after that's how clean it was, apparently my car was shooting flames occasionally.

Some photos:

My exhaust is sooooooo clean!!

post-52381-1238837841_thumb.jpg

About to get on the track:

post-52381-1238837962_thumb.jpg

Cooling off....

post-52381-1238837897_thumb.jpg

Sadly this thing didn't get out there

post-52381-1238838052_thumb.jpg

These did:

post-52381-1238838104_thumb.jpg

So did this:

post-52381-1238838146_thumb.jpg

If you haven't been before I HIGHLY recommend it, brilliant fun and you don't have to worry about breaking anything, you don't have to go all out, my third run I took it easier but still had a good time. The safety rules make it hard to have an accident and even if you come off the track, you're only in the sand, no damage done. I'd liek to see more of us there next time.

Total cost was $125 for the track and a 1 day CAMS license, plus $50 bucks for a full tank of BP ultimate, I had a quarter of a tank left at the end of the day and I only did 4 out of the 6 rounds.

Good clean fun!

Edited by medman2damax

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...