Jump to content
SAU Community

Recommended Posts

As stated,

Its time to offload some parts filling up the garage.

Firstly its time to let go if these beautiful rims. They are BBS LM 18 x 10 +20 in perfect condition besides one small gutter rash about 2cm long. Besides this they are like brand new. Dont pay $2000 per rim as charged by the Aust distributor. Fits R32/R33/R34 GTR

IMG_1362i.jpg

IMG_1366i.jpg

Rims only:$2500

Secondly, Greddy E-manage Ultimate with harness for R32 GTR with receipts from CRD. Was making 285kw atw and drove beautifully. Selling due to new tuner prefering PFC.

IMG_1375i.jpg

$700

Finally, brand new Catco 3" High Flow Metal Race Cat. - Stainless

Vehicle Compatibility: - R32/33/34 GTR - S13- R32 GTS-T - R33 GTS-T - Cefiro A31 - Laurel C33 - Stagea WGNC34- 300ZX Z32 - Pulsar GTI-R

- 3" Flanged

- Flows 706.2 CFM

- 200 Cell

- Gaskets Included

IMG_1384.jpg

$400. Sells for $440 through Justjap.

All parts located in Sydney. Willing to ship interstate.

cheers

MAtt

0423885535

Edited by mattblack

hi, im a regular on the skyline owners club in the uk, im interested in your emanage ultimate and harness :blink: would you be able to post over to the uk with it labeled as a gift :) ?? and would you take 600$ plus postage ?? :D thanks

alex

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...