Jump to content
SAU Community

Recommended Posts

OK, so do I take my R33 GTST or my R34 GTT ? The 33 has the most work but it is supposed to be an R34 day. If it's just cruisin' I guess the 34 as it's automatic.

OK, so do I take my R33 GTST or my R34 GTT ? The 33 has the most work but it is supposed to be an R34 day. If it's just cruisin' I guess the 34 as it's automatic.

There is a Prize given to any Non-R34 but...

there are many more on offer for ur R34 and you're parked with the other R34s and the 2metre NISSAN sign is next to the R34s and the official table is with the R34s and the Awards with prizes given out by High Performance Imports will be next to the R34s.

But wait! The 21st ANNIVERSARY of the R32 GT-R is next year via Old Pacific Hwy to Trackside Gosford!

And the 15th ANNIVERSARY of the R33 GT-R is 2010 too proposed for Macquarie Pass > Kangaroo Valley Rd > ???!

Just putting you in the picture hehe...

ahh geez, the R34 is getting old.

anyone got a street # for the regatta centre?

Its easy bloke. Come off the mulgoa road exit off the M4, follow all the way past penrith and out past all the car yards like holden and stuff. Then chuck a left at the big roundabout there will be a quix servo on the right. And then follow that road the center is on your right. Cant miss it the gate your looking for is halfway down and there are big signs with arrows pointing to gate A,B,C ect.

Its easy bloke. Come off the mulgoa road exit off the M4, follow all the way past penrith and out past all the car yards like holden and stuff. Then chuck a left at the big roundabout there will be a quix servo on the right. And then follow that road the center is on your right. Cant miss it the gate your looking for is halfway down and there are big signs with arrows pointing to gate A,B,C ect.

never been down penrith way so not too good with roads,

if its easy as you say it is then i shouldn't have any trouble,

thanks!

Its easy bloke. Come off the mulgoa road exit off the M4, follow all the way past penrith and out past all the car yards like holden and stuff. Then chuck a left at the big roundabout there will be a quix servo on the right. And then follow that road the center is on your right. Cant miss it the gate your looking for is halfway down and there are big signs with arrows pointing to gate A,B,C ect.

+1

...and if you're coming down the M4, there is a big

"Regatta Centre" sign at the Northern Rd Off-ramp. Yes you can take that one and follow directions, by turning left at Andrews Rd OR

...like Calsonic14U said, take the Mulgoa Off-ramp, turn right and follow Mulgoa Rd past Penrith to the big sign, "Regatta Centre".

Personally, I prefer this option. Shell V-Power is just after the Off-ramp & BP Ultimate is a bit further up but across the other side.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea my thought was tighter engine when hot is more load a poor ground connection can't take. On that note, I had time to check my driveshaft verical alignment tonight, it's +2 and -2 at either end, so thats perfect and how I had set it up last year. What would be the easiest way to check horizontal alignment between my diff and transmission? I can think of a few ways but they're all complicated and I feel like I'm overthinking it. I'm hoping it's that as I can't see any other reason why I have developed driveline vibration since I put the motor back in. 
    • Thank god. I thought I was the only one, nobody seems to mention this (cause nobody really goes this far in Sedan land). The car's track is 10mm wider at the rear, which explains why the rears sit a little further out for the same size wheels. There's not really many options in widebody land for sedans anyway - People will just use whatever came out of the box and then buy wheels/spacers to suit. To get it perfect you'll likely need custom wheels with custom offsets if you really want to get it perfect which is what I plan to do, but I also plan to utilize more of the inboard space for tyres at the rear... which is also something nobody ever seems to do.... OR my maths have failed me after 20,000 attempts and I'm about to make huge mistakes. 
    • What colour is that?  A mate of mine went red/black on his SLR5000 tribute recently also.  And yes, also glad to see this still progressing albeit slowly. 
    • found a company that makes a flat gauge face 3-d printed mounting base kit to eliminate the dished style gauges. if anyone else is looking to do the same https://www.dashfreaks.de/shop/flat-dials-holder-nissan-skyline-r34-gt-gtt/    
    • I installed my link ecu shortly after. But car ran fine with stock ecu and r35 coils, just had the traction control and slip lights on.
×
×
  • Create New...