Jump to content
SAU Community

Turbo Upgrade For A Rb20

Curmi

By Curmi,
in Wanted to Buy

 Share

Recommended Posts

Curmi Grand Master

Curmi

Posted
Posted (edited)

i just blew my r33 series 2 turbo was in my rb20 so now need a replacement turbo.

has to be in vic as i will pick it up asap and install it this weekend (hoping).

iam after a r33 turbo, or even a r32 turbo highflowed. or any other turbos has to be direct replacment and in vic....

iam after close to 200kw. quick response. i have supporting mods.

willing to spend $$$ on a quality turbo so pm me

cheers guys

Edited by R32 DRFT4
Link to comment
https://www.sau.com.au/forums/topic/264855-turbo-upgrade-for-a-rb20/
Share on other sites
VB- Veteran

VB-

Posted
Posted (edited)

its a long shot mate, but if you want a quality turbo that wont blow (like factory stuff)

ive got a Garrett GT3540 Turbo here. its big i know but cheap and good =D and will get you around 300kw, but has the ability to go up to 400.

$1600 ONO

let me know if ur intested

Edited by VB-
Curmi Grand Master

Curmi

Posted
  • Author
Posted

yeah too big mate lol and too much for me sorry and probly laggy but thanks mate

i picked up a rb20 turbo for the time being but i still want a r33 turbo, r33 highflow or bigger turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...