Jump to content
SAU Community

Recommended Posts

So I'm looking for suggestions for a drivers seat in my R33

I'm 6'3" so when im driving with the stock seat the steering wheel is pretty much in my lap which is not good when a little opposite lock is required in a hurry. I installed an Isotta taladega recliner which turned out to sit even higher than the standard seat!

So now I'm thinking i need a super low fixed back, which brings me to my next problem. Im about 95kg (aka a fat bastard) so I need a seat thats a little wider than ur usual race seats

Can anyone recommend a seat (fixed back or recliner) thats both low enough for tall people and wide enough for fat people?

Link to comment
https://www.sau.com.au/forums/topic/264859-super-low-seats-for-fat-guys/
Share on other sites

So I'm looking for suggestions for a drivers seat in my R33

I'm 6'3" so when im driving with the stock seat the steering wheel is pretty much in my lap which is not good when a little opposite lock is required in a hurry. I installed an Isotta taladega recliner which turned out to sit even higher than the standard seat!

So now I'm thinking i need a super low fixed back, which brings me to my next problem. Im about 95kg (aka a fat bastard) so I need a seat thats a little wider than ur usual race seats

Can anyone recommend a seat (fixed back or recliner) thats both low enough for tall people and wide enough for fat people?

A gtr seat, i bought one, they sit about 2 inch's lower than the gtst seat, was too small for me though but i have a fair few more kg's on you.

Edited by W0rp3D

yep first thing i noticed when i wacked in my gtr seats were that they were alot lower than standard.

a good pair of 33 gtr front seats depending on what series it comes from can go for around 700-1000. the obvious difference between models is its newer/less wear and direct bolt on for the correct corresponding models i think.

i'm 6'5" and 95kgs

i run 33 GTR seats and rails and have a nearly 2 inches of headroom in a 33 gtst

Damn, never knew we had someone big people on SAU...hahaha....You're not fat for your height mate...

Anyways, like he said...GTR seats are both comfy and give good head room. :D

yep first thing i noticed when i wacked in my gtr seats were that they were alot lower than standard.

a good pair of 33 gtr front seats depending on what series it comes from can go for around 700-1000. the obvious difference between models is its newer/less wear and direct bolt on for the correct corresponding models i think.

A 32/33/34 gtr seat will be a direct bolt in for any model apart from 34gtt and i guess 34gt, for some some reason the floor pan was different in that one model caompared to every other 32/33/34 skyline of any spec.

I'm around 6'3" too and I have had R33 GTR seats before. It's been ages since I had the standard R33 GTST seats so it's hard to remember exactly but the GTR seats do sit lower. The only problem I find though is that the steering wheel still gets in the way of my knees. Mainly left knee when using the clutch. The foot rest sits further forward than the clutch pedal so you have to lift you knee towards yourself to get it up and onto the pedal. This is when I have issues with the steering wheel getting in the way. I think the best way around this would be to get some recaro or similar seats and have the seat rail made to suit you and your driving position.

I guess it will also depend slightly on whether your height is based more around your legs or torso.

Has anyone had any experience with the IAP low and super low seat rails? the super lows suit fixed back only afaik and would like to know if the low type suit factory R33 gtst? I've emailed a re-seller but they were no help.

I can also get my hands on some WRX (MY02/03?) seats for next to nothing and was thinking about looking into modifying existing rails but am mainly just concerned about gaining some head room as having to pull back the sunroof cover every time is weak...I'm only 6'1" and if I can get away with spending ~$200 instead of plumping for GTR seats then i'd be a happy camper.

Has anyone had any experience with the IAP low and super low seat rails? the super lows suit fixed back only afaik and would like to know if the low type suit factory R33 gtst? I've emailed a re-seller but they were no help.

I can also get my hands on some WRX (MY02/03?) seats for next to nothing and was thinking about looking into modifying existing rails but am mainly just concerned about gaining some head room as having to pull back the sunroof cover every time is weak...I'm only 6'1" and if I can get away with spending ~$200 instead of plumping for GTR seats then i'd be a happy camper.

The reason the gtst seat is higher is because it has height and tilt adjustments, the gtr seat does not have that, maybe pull the gtst seat out and see if you can gut all that stuff out and make it lower, personally though you cant beat the feel and comfort of a gtr seat, once you have used one the gtst seat is just a POS.

  • 2 months later...
Damn, never knew we had someone big people on SAU...hahaha....You're not fat for your height mate...

Anyways, like he said...GTR seats are both comfy and give good head room. :D

In case the 'derriere' gets any bigger, hypnosis therapy :D helps to reduce weight/eating habits :)

im 6'6 and am having the same problem... damn seats. thing is, has anyone modified the rail so the seat can slide an inch or two further back?

the height is not the biggest issue for me although wouldn't mind getting a lower seat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...