Jump to content
SAU Community

Recommended Posts

is it entirely neccesary that i should run a turbo timer on my engine? considering GTSt's came stock without them, mines no different really...

iv got an Apexi pen-type turbo timer that i could hook up.

stock RB25DE with a snail on the side...7PSI etc...castrol edge 10W40 with oil stabiliser...i guess im just not sure as not having owned a turbo car for long, someone with more exp might be able to answer my question :D

cheers

Link to comment
https://www.sau.com.au/forums/topic/264979-turbo-timer-on-stock-rb25det/
Share on other sites

It would be a good idea man, all turbo cars should be sufficiently cooled down before the engine is switched off. It's just a safety thing, albeit it's a stock turbo, there is no point running the risk. It's just one of the joys of having a turbo car, getting to sit in it for a couple of minutes while it's cooling down, before you can walk away. Haha. I would say yes, install the turbo timer, it will save you the time of waiting.

Joel

It's not 100% necessary dude. I don't have one and I'm pushing 26psi through mine.

A turbo timer is a good thing if you thrash your car. The timer is used to circulate water through the turbo to cool it down for a couple of minutes if you've been giving it some and the turbo is very hot. If you turn the car off and the turbo is very hot, you run the risk of killing it.

If you don't want to use it, just drive easy before you park and then idle the car for a minute or so after a spirited run to let the turbo cool.

The other thing is that they are illegal in some states, and if you don't want to give Mr. Plod and excuse to give you a canary, just idle down, it's not that long man.

Dont need one at all, just dont boost the car hard all the way to your driveway and you will be fine, I just drive below 3000rpm for the last few minutes of my driving and turn the car straight off. I have a turbo timer but I very rarely use it, there more for a wank factor.

they can be bad in an accident, fuel pump staying on...

i would save your money, and just drive gently or around the block before you pull in... since moving to an apartment mine is off, but in the past i have mainly used it for warming the car up haha

Very valid points being said - Very true most of it.

The stock turbo is oil and water cooled, thus it doesnt need much cooling - After a spirited drive, i would let mine idle for 30 secs only.. but the last few mins of driving i would not let the boost gauge go past 0 at all.

with my new turbo - it doesnt need much cooling at all haha. It doesnt even spin on idle. lol.

Conclusion - Turbo timer isnt necessary if you use common sense.

Spend that money on a dump pipe, or an oil cooler.

IMHO if you drag race, the turn around and drive back is enough. If you drift/togue/gymkahna, then maybe, butas mentioned above, just let the car run for a bit it you get right off the track and park. I get my turbo/manifold glowing bright red at night when we are going down twistie back roads. 3 or 4 minutes later it's back to normal. As a matter of fact, I have a turbo timer, but I don't normally leave it on just to show off the fact that I ahve one, and when it comes to needing to leave the car run for a bit, I just leave it running as opposed to turning on the turbo timer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
    • Car has been running great, I've put about 300km's of break in time on it. First thing that stands out with properly sealing rings is no more noticeable crankcase smell coming out of my catch can. This may seem insignificant, but the constant smell while driving around was infuriating. It's also nice to see my oil level remain stable. Two new issues have developed that I only noticed this weekend though. There's a very noticeable driveline vibration past 100kmh. I only noticed it now as I've been babying it under 100kmh in the backroads. This comes as no surprise as I'm running a one-piece shaft, and I paid zero attention to my driveshaft angle when I put everything back in. I also have a fair bit of voltage drop on hot starts. The starter audibly is forcing. No issues on cold start though. I must not have removed all the paint under my main block ground during assembly. I'll try and take care of both those issues this week once the kids are asleep.  I also received all the parts I was missing for my direct port setup. I will hopefully have pictures of that up soon. I'm hoping to get back on the dyno the week of June 30th as I'll be on vacation. I'm confident I should be able to make north of 500rwkw on pump gas and WMI. I'll go back again later this summer with E98, but I want to confirm my ethanol content sensor is working properly first. I've never seen it read anything but 11%. This makes sense for our 10% ethanol content pump gas here, but I would expect the occasional movement between fill ups. 
    • 75% complete. Will now need to get a new axle with 5x114.3 hubs and then figure out how to customize some mudguards for it once the wheels are on.
    • Trailer prep is underway... Lined up the wheel to get a rough indication of how it would sit Then removed all the bits (as far as possible) and gave the frame a light sand and quick lick of paint   Then added some carpet
×
×
  • Create New...