Jump to content
SAU Community

Recommended Posts

Cleanout of parts that i have accumulated over the years, will accept PayPal , direct dep. Or COD, will post at buyers expense, i have weights & dimensions for most things, people are welcome to get their own quote, i will package, but don’t expect anything flash.

ALL OFFERS CONSIDERED!!

Ring/PM Rob

0403301857

(Melbourne)

R32/R33 BATMBL style stainless steel split dump pipe turbo back good O2 sensor & cat convertor

3 wire O2 sensor included in working condition

$200ono

post-27754-1239606275_thumb.jpgpost-27754-1239606345_thumb.jpgpost-27754-1239606364_thumb.jpg

JJR Style R32/R33 split dump pipe turbo back, stainless steel, woven wrap fibreglass heat shield only a few months old, stainless steel ties, high temp paint on woven wrap to prevent corrosion. (over $150 worth of fibreglass wrapping from the states)Decreased under bonnet temps .

3 wire O2 sensor included in working condition, tested with multimeter voltage very quick to react

$200ono

post-27754-1239606382_thumb.jpgpost-27754-1239606403_thumb.jpgpost-27754-1239606423_thumb.jpg

tubular bolt in 6 point roll cage with padding, plates, bolts. Came out of a D2 car from Japan, built for R32, not too sure what other cars it would fit into, possibly laurel/cefiro

$1000ono

post-27754-1239606443_thumb.jpgpost-27754-1239606467_thumb.jpg

JIC shortened R32 front upper arms

$150ono

post-27754-1239606490_thumb.jpgpost-27754-1239606512_thumb.jpg

R32 4 door type M side skirts, rare

$250pair ono

post-27754-1239606531_thumb.jpgpost-27754-1239606549_thumb.jpg

Nissan Skyline R32 GTS/GTR,300ZX And S13 Rear Suspension Upper Control Arms

S13 1989-1994

300Zx Z32 1989-1994

Skyline R32 1989-1994

$80pair

post-27754-1239606574_thumb.jpg

Genuine Cusco pillow ball castor rods/arms suit R32 gts/t S13

$250ono

post-27754-1239606596_thumb.jpg

Whiteline R32 front & rear strut braces, practically new

$320

post-27754-1239606632_thumb.jpg

R32 impul front sway bar with D-shackles & bushes

$100ono

post-27754-1239606652_thumb.jpg

R32 gtst manual standard computer, 93’ model, un chipped

$150ono

post-27754-1239606677_thumb.jpg

R32 type m front bar (plastic) holes cut for N1 nostrils (i don’t have these) and windscreen washer squirter for FMIC spray, bar would come up looking great once painted

$120 ono

post-27754-1239606735_thumb.jpgpost-27754-1239606761_thumb.jpg

R32 type m front bar damaged on LHS,

$80 ono (pick up only)

post-27754-1239606793_thumb.jpgpost-27754-1239606829_thumb.jpg

Exedy Clutch Kit

This is a Heavy Duty Clutch Kit for the following:

Nissan Skyline RB20DET & RB25DET

R31- 1987-89 2.0Lt

R32- 1989 onwards 2.0Lt

R33- 1993 onwards 2.5 Lt

Purchased from CBA WA for $450

Clutch is practically new save $$

Clutch was used for approx. 2-3months on RB20DET powered Nissan skyline R32 with 210-220rwkw without slipping once. Very street-able clutch with good pedal feel (heavier than standard) and friction , clutch had a very easy life for the short period it was in my car (i don’t track or drift my car), data sheet that i have from when i bought the car says it has following specs:

clamping load = 2400 LB

faces = 2

Radius =7.625

Friction coefficient = 0.3

Torque = 457.6 ft/lb @ 4500 rpm

Horsepower = 392 HP

$250

post-27754-1239606860_thumb.jpgpost-27754-1239606876_thumb.jpgpost-27754-1239606898_thumb.jpgpost-27754-1239606918_thumb.jpgpost-27754-1239606941_thumb.jpg

RB20 clutch fans 2 to choose from

$40 each

post-27754-1239606958_thumb.jpgpost-27754-1239606975_thumb.jpg

Trust S15 exhaust and cat convertor. 2 parts held together with TRUST stainless clamp.

Has 'Jasma' plate on it (whatever that means)

Stainless rear cannon muffler (few scratches as seen in pictures but no dents)

Rest of exhaust and second muffler made from mild steel, painted in high temp matt paint.

Cat convertor is near new but is welded in place,

$700ono

post-27754-1239606992_thumb.jpg

R32 standard front sway bar

$20 (pickup only)

post-27754-1239607008_thumb.jpg

Aluminium intercooler piping, lipped either end, 3” mandrel bent

$20 pair

post-27754-1239607026_thumb.jpg

R32 RB20 cam gears, standard parts, prefect condition, no wear on teeth, come as pair but may split

$50ono

post-27754-1239607047_thumb.jpg

R32 s13 front left lower control arm

$30

post-27754-1239607061_thumb.jpg

Nolathane ‘D’ shape bushes

Repco part no.

42150 (x2) 24mm ID/ 31mm OD

42937 (x2) 27mm ID /31mm OD

D shackles, for sway bar, tried to fit but never used, comes with grease sachet

$20

post-27754-1239607078_thumb.jpg

Standard R32 fuel pump, taken out of low Km car

$30

post-27754-1239607117_thumb.jpg

R32 ashtray with Apexi badge, rice up your interior with this fine specimen

Brand new heat shield for oil/water & turbo return lines, sized to fit single turbo RB motor but has many applications. 2 x 1000mm

$40

post-27754-1239607140_thumb.jpgpost-27754-1239607156_thumb.jpg

post-27754-1239607097_thumb.jpg

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

R32/R33 BATMBL style stainless steel split dump pipe turbo back good O2 sensor & cat convertor

3 wire O2 sensor included in working condition

$200ono

Willing to separate the cat? is it 2.5" or 3"?

Thanks

what size sway bar will those notalane shackles and dbushes fit? front or rear?

bushes are for either 24mm or 27mm dia. sway bar, i can only guarantee the hole centres for the 'D' shackles will line up for the front sway bar on a R32, being a nissan though, most likely it will fit on the rear sway bar also but i cannot guarantee it.

what size is the impul swaybar?

To reply to everyone's queries, the impul sway bar is only 24-25mm dia. so i don't think it would greatly bigger than standard.

Also i am almost positive that i won't fit a GTR,

call dibs on front n rear upper control arms

pending response

text message sent

All PM's replied to i think so if you are waiting for reply and i haven't then let me know, i am losing track of who sent what, too many items psoted at a time..

is the drivers side torsion bar on the roll cage bent????

pm me a est. price on postage if you have one please.

Nah the cage isn't bent, the bars are made like that on both sides so that they are below the level of the seats (so your hip doesn't rub against them) across the drivers & passengers doors & don't obstruct you getting in and out of the car, I may have pictures fitted somewhere if you are interested, PM me your postcode so i can quote you for freight.

Thanks

R32/R33 BATMBL style stainless steel split dump pipe turbo back good O2 sensor & cat convertor

3 wire O2 sensor included in working condition

SOLD!!!

All PM's replied i think

JJR Style R32/R33 split dump pipe turbo back, stainless steel, woven wrap fibreglass heat shield only a few months old, stainless steel ties, high temp paint on woven wrap to prevent corrosion. (over $150 worth of fibreglass wrapping from the states)Decreased under bonnet temps .

3 wire O2 sensor included in working condition, tested with multimeter voltage very quick to react

Brand new heat shield for oil/water & turbo return lines, sized to fit single turbo RB motor but has many applications. 2 x 1000mm

both sold

For those that have asked:

JIC shortened R32 front upper arms are 155mm between centres compared to 180mm stock, not sure how many degrees camber change it gives.

tubular bolt in 6 point roll cage with padding, plates, bolts. Came out of a D2 car from Japan, built for R32, not too sure what other cars it would fit into, possibly laurel/cefiro

SOLD PENDING PAYMENT

Nissan Skyline R32 GTS/GTR,300ZX And S13 Rear Suspension Upper Control Arms

S13 1989-1994

300Zx Z32 1989-1994

Skyline R32 1989-1994

SOLD

JIC shortened R32 front upper arms

SOLD

just to correct a few mistakes (how the hell do u make a donation so u can edit yours posts??)

The roll cage is for a 4-Door R32 and wont fit a 2-door

And the front lower control arm is a RHS one not left . WHOOPS!!! My mistake sorry Russ!!

Both of these are still for sale..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...